## Summary
Resolves#562
Implements regex change to support valid characters discussed by
@daveallie in issue
[here](https://github.com/crosspoint-reader/crosspoint-reader/issues/562#issuecomment-3830809156).
Also rejects `.` and `..` as folder names which are invalid in FAT32 and
exFAT filesystems
## Additional Context
- Unsure on the wording for the alert, it feels overly explicit, but
that might be a good thing. Happy to change.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< PARTIALLY >**_
## Summary
* Truncating chapter titles using utf8 safe functions (Cyrillic titles
were split mid codepoint)
* refactoring of lib/Utf8
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< PARTIALLY >**_
## Summary
* Fixing custom sleep behaviour where the first image in the /sleep
directory is not shown
* image at index 0 is not being rendered when more than 1 image is
stored in /sleep directory, because `APP_STATE.lastSleepImage` is always
0.
## Additional Context
* `APP_STATE.lastSleepImage` is reset to 0 when a epub is open, this
value is only used to compare it to the randomly selected one in
`renderCustomSleepScreen()` that should always be a valid index, since
the list of valid bmp images is colected from scratch. -> no need to
reset it and block image @ index 0 from being rendered
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
Co-authored-by: Oyster <Oyster@home>
## Summary
* This change hides the button hints from overlapping chapter titles
when in landscape CW mode.
Before
After
## Additional Context
* I initially considered implementing an offset fix, but with potential
UI changes on the horizon, hiding the button hints appears to be the
simplest solution for now.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? < Partially >
## Summary
* Clarify strings on Wifi connection error screens
* I have confirmed on device that these are short enough not to overflow
screen margins
## Additional Context
* Several screens give duplicative text (e.g., header "Connection
Failed" with contents text "Connection failed") or slightly confusing
text (header "Forget Network?" with text "Remove saved password?")
---
### AI Usage
Did you use AI tools to help write this code? **No**
## Summary
* refactors Indexing popups into ScreenComponents (they had different
implementations in different files)
* removes Indexing popup for small chapters
* only show Indexing popup (without progress bar) for large chapters
(using same minimum file size condition as for progress bar before)
## Additional Context
* Having to show even single popup message and redraw the screen slows
down the flow significantly
* Testing results:
* Opening large chapter with progress bar - 11 seconds
* Same chapter without progress bar, only single Indexing popup - 5
seconds
---
### AI Usage
Did you use AI tools to help write this code? _**< PARTIALLY>**_
## Summary
* Adds a menu in the Epub reader
* The Chapter selection is moved there to pos 1 (so it can be reached by
double tapping the confirm button)
* A Go Home is there, too
* Most significantly, a function "Delete Book Cache" is added. This
returns to main (to avoid directly rebuilding cached items, eg. if this
is used to debug/develop other areas - and it's also easier ;))
Probably, the Sync function could now be moved from the Chapter
selection to this menu, too.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY**_
## Summary
Extracted some changes from
https://github.com/crosspoint-reader/crosspoint-reader/pull/500 to make
reviewing easier
This PR adds HAL (Hardware Abstraction Layer) for display and GPIO
components, making it easier to write a stub or an emulated
implementation of the hardware.
SD card HAL will be added via another PR, because it's a bit more
tricky.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **NO**
* **What is the goal of this PR?** Implement a metadata viewer for the
Recents screen
* **What changes are included?**
| Recents | Files |
| --- | --- |
| <img alt="image"
src="https://github.com/user-attachments/assets/e0f2d816-ddce-4a2e-bd4a-cd431d0e6532"
/> | <img alt="image"
src="https://github.com/user-attachments/assets/3225cdce-d501-4175-bc92-73cb8bfe7a41"
/> |
For the Files screen, I have not made any changes on purpose. For the
Recents screen, we now display the Book title and author. If it is a
file with no epub metadata like txt or md, we display the file name
without the file extension.
---
Did you use AI tools to help write this code? _**< YES >**_
Although I went trough all the code manually and made changes as well,
please be aware the majority of the code is AI generated.
---------
Co-authored-by: Eliz Kilic <elizk@google.com>
## Summary
Finally, I have received my device and got to chance to work on OTA.
https://github.com/crosspoint-reader/crosspoint-reader/issues/176
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
Existing OTA functionality is very buggy, many of times (I would say 8
out of 10) are end up with fail for me. When the time that it works it
is very slow and take ages. For others looks like end up with crash or
different issues.
* **What changes are included?**
To be honest, I'm not familiar with Arduino APIs of OTA process, but
looks like not good as much esp-idf itself. I always found Arduino APIs
very bulky for esp32. Wrappers and wrappers.
## Additional Context
Right now, OTA takes ~ 3min 10sec (of course depends on size of .bin
file). Can be tested with playing version info inside from
`platform.ini` file.
```
[crosspoint]
version = 0.14.0
```
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< NO >**_
## Summary
* If long-press chapter skip is disabled, turn pages on button pressed,
not released
* Makes page turning snappier
* Refactors MappedInputManager for readability
---
### AI Usage
Did you use AI tools to help write this code? _**< PARTIALLY>**_
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?** This PR introduces a new "Status Bar"
mode that displays a visual progress bar at the bottom of the screen,
providing readers with a graphical indication of their position within
the book.
* **What changes are included?**
* **Settings**: Updated SettingsActivity to expand the "Status Bar"
configuration with a new option: Full w/ Progress Bar.
* **EPUB Reader**: Modified EpubReaderActivity to calculate the global
book progress and render a progress bar at the bottom of the viewable
area when the new setting is active.
* **TXT Reader**: Modified TxtReaderActivity to implement similar
progress bar rendering logic based on the current page and total page
count.
## Additional Context
* The progress bar is rendered with a height of 4 pixels at the very
bottom of the screen (adjusted for margins).
* The feature reuses the existing renderStatusBar logic but
conditionally draws the bar instead of (or in addition to) other
elements depending on the specific implementation details in each
reader.
* Renamed existing 'Full' mode to 'Full w/ Percentage'
* Added new 'Full w/ Progress Bar' option
<img
src="https://github.com/user-attachments/assets/08c0dd49-c64c-4d4d-9fbb-f576c02d05d9"
width="500">
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
Fixes#487
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _** YES **_
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
This was originally a comment in #499, but I'm making it its own PR,
because it doesn't depend on anything there and then I can base that PR
on this one.
Currently, `drawBitmap` is used for covers and sleep wallpaper, and
`drawImage` is used for the boot logo. `drawBitmap` goes row by row and
pixel by pixel, so it respects the renderer orientation. `drawImage`
just calls the `EInkDisplay`'s `drawImage`, which works in the eink
panel's native display orientation.
`drawImage` rotates the x,y coordinates where it's going to draw the
image, but doesn't account for the fact that the northwest corner in
portrait orientation becomes, the southwest corner of the image
rectangle in the native orientation. The boot and sleep activities
currently work around this by calculating the north*east* corner of
where the image should go, which becomes the northwest corner after
`rotateCoordinates`.
I think this wasn't really apparent because the CrossPoint logo is
rotationally symmetrical. The `EInkDisplay` `drawImage` always draws the
image in native orientation, but that looks the same for the "X" image.
If we rotate the origin coordinate in `GfxRenderer`'s `drawImage`, we
can use a much clearer northwest corner coordinate in the boot and sleep
activities. (And then, in #499, we can actually rotate the boot screen
to the user's preferred orientation).
This does *not* yet rotate the actual bits in the image; it's still
displayed in native orientation. This doesn't affect the
rotationally-symmetric logo, but if it's ever changed, we will probably
want to allocate a new `u8int[]` and transpose rows and columns if
necessary.
## Additional Context
I've created an additional branch on top of this to demonstrate by
replacing the logo with a non-rotationally-symmetrical image:
<img width="128" height="128" alt="Cat-in-a-pan-128-bw"
src="https://github.com/user-attachments/assets/d0b239bc-fe75-4ec8-bc02-9cf9436ca65f"
/>
https://github.com/crosspoint-reader/crosspoint-reader/compare/master...maeveynot:rotated-cat
(many thanks to https://notisrac.github.io/FileToCArray/)
As you can see, it is always drawn in native orientation, which makes it
sideways (turned clockwise) in portrait.
---
### AI Usage
No
Co-authored-by: Maeve Andrews <maeve@git.mail.maeveandrews.com>
## Summary
* Extract author from XTC/XTCH files
## Additional Context
* Based on updated details in
https://gist.github.com/CrazyCoder/b125f26d6987c0620058249f59f1327d
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? No
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
* Aims to fix Issue #220
* **What changes are included?**
- Increased size of `progress.bin` such that total page count of current
section can be stored
- Comparison of total page count is done to determine if reader settings
were changed
- New position/page number is calculated using percentage calculated
from read progress
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
Fix https://github.com/crosspoint-reader/crosspoint-reader/issues/288
Based on my observation, it seems like the problem was that
`inputManager.isPressed(InputManager::BTN_POWER)` takes a bit of time
after waking up to report the correct value. I haven't tested this
behavior with a standalone ESP32C3, but if you know more about this,
feel free to comment.
However, if we just want short press, I think it's enough to check for
wake up source. If we plan to allow multiple buttons to wake up in the
future, may consider using ext1 / `esp_sleep_get_ext1_wakeup_status()`
to allow identify which pin triggered wake up.
Note that I'm not particularly experienced in esp32 developments, just
happen to have prior knowledge hacking esphome.
## Additional Context
N/A
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? NO
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
Our esp32 consistently dropped the last few packets of the TCP transfer
in the old implementation. Only about 1/5 transfers would complete. I've
refactored that entire system into an actual Calibre Device Plugin that
basically uses the exact same system as the web server's file transfer
protocol. I kept them separate so that we don't muddy up the existing
file transfer stuff even if it's basically the same at the end of the
day I didn't want to limit our ability to change it later.
I've also added basic auth to OPDS and renamed that feature to OPDS
Browser to just disassociate it from Calibre.
---------
Co-authored-by: Arthur Tazhitdinov <lisnake@gmail.com>
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
On the Forget Network page
* Update the default option to be DON'T forget the network
* Make the options clearer ("Cancel" and "Forget network")
* Unify the button hints to match the rest of the UI
## Additional Context
Closes#427
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? PARTIALLY
## Summary
* Fixes#475
* Fixes#477
* Closes#428
## Additional Context
* Updates to
`src/activities/reader/EpubReaderChapterSelectionActivity.cpp` are
copied verbatim from #433 (thanks to @jonasdiemer)
* Update to `src/activities/settings/KOReaderSettingsActivity.cpp` per
discussion with @itsthisjustin at #428
Tested on my device with several books and koreader sync turned on and
off.
---
### AI Usage
Did you use AI tools to help write this code? _NO_
## Summary
Addresses
https://github.com/crosspoint-reader/crosspoint-reader/issues/504
- Reverts book progress % to showing as an integer instead of with a
decimal place
- This was changed to 1 decimal point of precision in
https://github.com/crosspoint-reader/crosspoint-reader/pull/232 from
what I can tell
- As this wasn't the primary intention of that PR, I'm assuming it was
left in accidentally
IMO having a decimal place of precision is too much for something as
vague as book completion percent. This de-clutters the status bar and
prevents extra updates as you change pages.
---
### AI Usage
YES
When reading on Landscape Counter ClockWise mode, the left/right button
appear inverted: the upper button (left) goes down and the lower button
(right) goes up.
Discussion: #449
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
Add a new configuration for the front buttons: Back, Confirm, Right,
Left
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
- Rewrite OpdsParser to stream parsing instead of full content
- Fix OOM due to big http xml response
Closes#385
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
## Summary
When uploading or downloading an updated ebook from SD/WebUI/OPDS with
same the filename the `.crosspoint` cache is not cleared. This can lead
to issues with the Table of Contents and hangs when switching between
chapters.
I encountered this issue in two places:
- When I need to do further ePub cleaning using Calibre after I load an
ePub and find that some of its formatting should be cleaned up. When I
reprocess the same book and want to place it back in the same location I
need a way to invalidate the cache.
- When syncing RSS feed generated epubs. I generate news ePubs with
filenames like `news-outlet.epub` and so every day when I fetch new news
the crosspoint cache needs to be cleared to load that file.
This change offers the following features:
- On web uploads, if the file already exists, the cache for that file is
cleared
- On OPDS downloads, if the file already exists, the cache for that file
is cleared
- There's now an action for `Clear Cache` in the Settings page which can
clear the cache for all books
Addresses
https://github.com/crosspoint-reader/crosspoint-reader/issues/281
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? PARTIALLY
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Disables going to sleep after uploading new firmware
* Makes developer experience easier
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**< NO >**_
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
## Summary
Give space to the chapter title if we don't show battery percentage.
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Include superscripts and subscripts in fonts
## Additional Context
* Original change came from
https://github.com/crosspoint-reader/crosspoint-reader/pull/248
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? No
---------
Co-authored-by: cor <cor@pruijs.dev>
# Summary
This PR introduces a reusable Tab Bar component and combines the Recent
Books and File Browser into a unified tabbed page called "My Library"
accessible from the Home screen.
## Features
### New Tab Bar Component
A flexible, reusable tab bar component added to `ScreenComponents` that
can be used throughout the application.
### New Scroll Indicator Component
A page position indicator for lists that span multiple pages.
**Features:**
- Up/down arrow indicators
- Current page fraction display (e.g., "1/3")
- Only renders when content spans multiple pages
### My Library Activity
A new unified view combining Recent Books and File Browser into a single
tabbed page.
**Tabs:**
- **Recent** - Shows recently opened books
- **Files** - Browse SD card directory structure
**Navigation:**
- Up/Down or Left/Right: Navigate through list items
- Left/Right (when first item selected): Switch between tabs
- Confirm: Open selected book or enter directory
- Back: Go up directory (Files tab) or return home
- Long press Back: Jump to root directory (Files tab)
**UI Elements:**
- Tab bar with selection indicator
- Scroll/page indicator on right side
- Side button hints (up/down arrows)
- Dynamic bottom button labels ("BACK" in subdirectories, "HOME" at
root)
## Tab Bar Usage
The tab bar component is designed to be reusable across different
activities. Here's how to use it:
### Basic Example
```cpp
#include "ScreenComponents.h"
void MyActivity::render() const {
renderer.clearScreen();
// Define tabs with labels and selection state
std::vector<TabInfo> tabs = {
{"Tab One", currentTab == 0}, // Selected when currentTab is 0
{"Tab Two", currentTab == 1}, // Selected when currentTab is 1
{"Tab Three", currentTab == 2} // Selected when currentTab is 2
};
// Draw tab bar at Y position 15, returns height of the tab bar
int tabBarHeight = ScreenComponents::drawTabBar(renderer, 15, tabs);
// Position your content below the tab bar
int contentStartY = 15 + tabBarHeight + 10; // Add some padding
// Draw content based on selected tab
if (currentTab == 0) {
renderTabOneContent(contentStartY);
} else if (currentTab == 1) {
renderTabTwoContent(contentStartY);
} else {
renderTabThreeContent(contentStartY);
}
renderer.displayBuffer();
}
```
Video Demo: https://share.cleanshot.com/P6NBncFS
<img width="250"
src="https://github.com/user-attachments/assets/07de4418-968e-4a88-9b42-ac5f53d8a832"
/>
<img width="250"
src="https://github.com/user-attachments/assets/e40201ed-dcc8-4568-b008-cd2bf13ebb2a"
/>
<img width="250"
src="https://github.com/user-attachments/assets/73db269f-e629-4696-b8ca-0b8443451a05"
/>
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?** (e.g., Fixes a bug in the user
authentication module, Implements the new feature for
file uploading.)
As we get more settings, I think it makes sense to do categories for
them. This just allows users to find the settings easier and navigate to
them.
* **What changes are included?**
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks, specific areas to
focus on).
Co-authored-by: dpoulter <daniel@yoco.com>
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?** (e.g., Implements the new feature for
file uploading.)
- Implements a fix to truncate chapter names that exceeds display width
* **What changes are included?**
- Implements a fix to truncate chapter names that exceeds display width
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
- Prior to the fix, if the book contains multiple chapters with names
longer than the display width, there is a noticeable delay when
scrolling through the list of chapters.
Serial output of the issue:
```
[25673] [ACT] Entering activity: EpubReaderChapterSelection
[25693] [GFX] !! Outside range (485, 65) -> (65, -6)
[25693] [GFX] !! Outside range (486, 65) -> (65, -7)
[25693] [GFX] !! Outside range (487, 65) -> (65, -8)
[25693] [GFX] !! Outside range (488, 65) -> (65, -9)
[25693] [GFX] !! Outside range (485, 66) -> (66, -6)
[25693] [GFX] !! Outside range (486, 66) -> (66, -7)
[25694] [GFX] !! Outside range (487, 66) -> (66, -8)
[25694] [GFX] !! Outside range (484, 67) -> (67, -5)
[25694] [GFX] !! Outside range (485, 67) -> (67, -6)
[25694] [GFX] !! Outside range (486, 67) -> (67, -7)
[25694] [GFX] !! Outside range (483, 68) -> (68, -4)
[25694] [GFX] !! Outside range (484, 68) -> (68, -5)
[25694] [GFX] !! Outside range (485, 68) -> (68, -6)
```
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**NO**_
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Adds (optional) Hyphenation for English, French, German, Russian
languages
## Additional Context
* Included hyphenation dictionaries add approximately 280kb to the flash
usage (German alone takes 200kb)
* Trie encoded dictionaries are adopted from hypher project
(https://github.com/typst/hypher)
* Soft hyphens (and other explicit hyphens) take precedence over
dict-based hyphenation. Overall, the hyphenation rules are quite
aggressive, as I believe it makes more sense on our smaller screen.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Fixes#388
## Additional Context
* Tested on my own device
* See images at #388 for what home screen looked like before.
* With this PR the home screen shows the following (selected and
unselected recent book × cover image rendered or not)
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? **YES**
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
## Summary
- Adds KOReader progress sync integration, allowing CrossPoint to sync
reading positions with other
KOReader-compatible devices
- Stores credentials securely with XOR obfuscation
- Uses KOReader's partial MD5 document hashing for cross-device book
matching
- Syncs position via percentage with estimated XPath for compatibility
# Features
- Settings: KOReader Username, Password, and Authenticate options
- Sync from chapters menu: "Sync Progress" option appears when
credentials are configured
- Bidirectional sync: Can apply remote progress or upload local progress
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* This PR solves issue
https://github.com/crosspoint-reader/crosspoint-reader/issues/357 in the
first commit
* I then added an additional commit which means when you reach the end
of the keyboard, if you go 'beyond', you wrap back to the other side.
* This replaces existing behaviour, so if you would rather this be
removed, let me know and I'll just do the `caps` -> `shift` change
## Additional Context
### Screenshots for the new shift display
I thought it might not fit and need column size changes, but ended up
fitting fine, see screenshots showing this below:
<img width="573" height="366" alt="image"
src="https://github.com/user-attachments/assets/b8f6a4ec-94f5-4f5e-b9a6-06cc5f250ddb"
/>
<img width="570" height="308" alt="image"
src="https://github.com/user-attachments/assets/7d775518-4784-4120-a20a-a9dc67af8565"
/>
### Gif showing the wrap-around of the text
---
### AI Usage
Did you use AI tools to help write this code? **PARTIALLY** - used to
double check the text wrapping had no edge-cases. (It did also suggest
rewriting the function, but I decided that was too big of a change for a
working part of the codebase, for now!)
## Summary
* Implements #380, allowing the user to see the device's MAC address in
order to register on wifi networks
## Additional Context
* Although @markatlnk suggested showing on the settings screen, I
implemented display at the bottom of the WiFi Networks selection screen
(accessed via "File Transfer" > "Join a Network") since I think it makes
more sense there.
* Tested on my own device
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**YES**_
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
## Summary
* This builds upon the helpful PR
https://github.com/crosspoint-reader/crosspoint-reader/pull/341, and
adds support for the setting to also apply to the XTC reader, which I
believed has just been missed and was not intentionally left out.
* XTC does not have chapter support yet, but it does skip 10 pages when
long-pressed, and so I think this is useful.
---
### AI Usage
Did you use AI tools to help write this code? No
## Summary
* **What is the goal of this PR?** Fix WiFi file transfer stability
issues (especially crashes during uploads) and improve upload speed via
WebSocket binary protocol. File transfers now don't really crash as
much, if they do it recovers and speed has gone form 50KB/s to 300+KB/s.
* **What changes are included?**
- **WebSocket upload support** - Adds WebSocket binary protocol for file
uploads, achieving faster speeds 335 KB/s vs HTTP multipart)
- **Watchdog stability fixes** - Adds `esp_task_wdt_reset()` calls
throughout upload path to prevent watchdog timeouts during:
- File creation (FAT allocation can be slow)
- SD card write operations
- HTTP header parsing
- WebSocket chunk processing
- **4KB write buffering** - Batches SD card writes to reduce I/O
overhead
- **WiFi health monitoring** - Detects WiFi disconnection in STA mode
and exits gracefully
- **Improved handleClient loop** - 500 iterations with periodic watchdog
resets and button checks for responsiveness
- **Progress bar improvements** - Fixed jumping/inaccurate progress by
capping local progress at 95% until server confirms completion
- **Exit button responsiveness** - Button now checked inside the
handleClient loop every 64 iterations
- **Reduced exit delays** - Decreased shutdown delays from ~850ms to
~140ms
**Files changed:**
- `platformio.ini` - Added WebSockets library dependency
- `CrossPointWebServer.cpp/h` - WebSocket server, upload buffering,
watchdog resets
- `CrossPointWebServerActivity.cpp` - WiFi monitoring, improved loop,
button handling
- `FilesPage.html` - WebSocket upload JavaScript with HTTP fallback
## Additional Context
- WebSocket uses 4KB chunks with backpressure management to prevent
ESP32 buffer overflow
- Falls back to HTTP automatically if WebSocket connection fails
- The main bottleneck now is SD card write speed (~44% of transfer
time), not WiFi
- STA mode was more prone to crashes than AP mode due to external
network factors; WiFi health monitoring helps detect and handle
disconnections gracefully
---
### AI Usage
Did you use AI tools to help write this code? _**YES**_ Claude did it
ALL, I have no idea what I am doing, but my books transfer fast now.
---------
Co-authored-by: Claude <noreply@anthropic.com>
## Summary
Adds a new "Long-press Chapter Skip" toggle in Settings to control
whether holding the side buttons skips chapters.
I kept accidentally triggering chapter skips while reading, which caused
me to lose my place in the middle of long chapters.
## Additional Context
* Add any other information that might be helpful for the reviewer
(e.g., performance implications, potential risks,
specific areas to focus on).
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code? _**PARTIALLY **_
