## Summary
- Nav file in EPUB 3 file is a HTML file with relative hrefs
- If this file exists anywhere but in the same location as the
content.opf file, navigating in the book will fail
- Bump the book cache version to rebuild potentially broken books
## Additional Context
- Fixes https://github.com/daveallie/crosspoint-reader/issues/264
---
### AI Usage
While CrossPoint doesn't have restrictions on AI tools in contributing,
please be transparent about their usage as it
helps set the right context for reviewers.
Did you use AI tools to help write this code?
- [ ] Yes
- [ ] Partially
- [x] No
## Summary
* Remove HTML entity parsing
* This has been completely useless since the introduction of expat
* expat tries to parse all entities in the document, but only knows of
HTML ones
* Parsing will never end with HTML entities in the text, so the
additional step to parse them that we had went completely unused
* We should figure out the best way to parse that content in the future,
but for now remove that module as it generates a lot of heap allocations
with its map and strings
## Summary
* **What is the goal of this PR?** Add EPUB 3 support by implementing
native navigation document (nav.xhtml) parsing with NCX fallback,
addressing issue Fixes: #143.
* **What changes are included?**
- New `TocNavParser` for parsing EPUB 3 HTML5 navigation documents
(`<nav epub:type="toc">`)
- Detection of nav documents via `properties="nav"` attribute in OPF
manifest
- Fallback logic: try EPUB 3 nav first, fall back to NCX (EPUB 2) if
unavailable
- Graceful degradation: books without any TOC now load with a warning
instead of failing
## Additional Context
* The implementation follows the existing streaming XML parser pattern
using Expat to minimize RAM usage on the ESP32-C3
* EPUB 3 books that include both nav.xhtml and toc.ncx will prefer the
nav document (per EPUB 3 spec recommendation)
* No breaking changes - existing EPUB 2 books continue to work as before
* Tested on examples from
https://idpf.github.io/epub3-samples/30/samples.html
## Summary
* **What is the goal of this PR?**
Add a new user setting for paragraph alignment, instead of hard-coding
full justification.
* **What changes are included?**
One new line in the settings screen, with 4 options
(justify/left/center/right). Default is justified since that's what it
was already. I personally only wanted to disable justification and use
"left", but I included the other options for completeness since they
were already supported.
## Additional Context
Tested on my X4 and looks as expected for each alignment.
Co-authored-by: Maeve Andrews <maeve@git.mail.maeveandrews.com>
## Summary
* Update EpdFontFamily::Style to be u8 instead of u32 (saving 3 bytes
per word)
* Update layout width/height to be u16 from int
* Update page element count to be u16 from u32
* Update text block element count to be u16 from u32
* Bumped section bin version to version 8
This parses the guide section in the content.opf for text/start
references and jumps to this on first open of the book.
Currently, this behavior will be repeated in case the reader manually
jumps to Chapter 0 and then re-opens the book. IMO, this is an
acceptable edge case (for which I couldn't see a good fix other than to
drag a "first open" boolean around).
---------
Co-authored-by: Sam Davis <sam@sjd.co>
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Show previous title for unnamed spines
* The spec is a little unclear, but there are plenty of cases where
chapters are split up in parts and should show the previous chapter's
title
* List TOC items instead of spine items in chapter select
* Bump `BOOK_CACHE_VERSION` to `2` to force regeneration of spine item's
TOC indexes
## Summary
* Swap to updated SDCardManager which uses SdFat
* Add exFAT support
* Swap to using FsFile everywhere
* Use newly exposed `SdMan` macro to get to static instance of
SDCardManager
* Move a bunch of FsHelpers up to SDCardManager
## Summary
* Consolidate chapter page data into single file
* Header structure of the file stays the same, following the page count,
we now put a LUT offset
* The page data is all then appended to this file
* Finally the LUT is appended to the end of the file, and the page count
is updated
* This will also significantly improve the duration of cache cleanup
which takes a while to scan the directory and cleanup content
* Remove page file version as it's all tied up into the section file now
* Bumped section file version to 7
* Moved section content into sub directory
* Updated docs
## Additional Context
* Benchmarks:
* Generating 74 pages of content from a chapter in Jade Legacy took:
* master: 6,229ms
* this PR: 1,305ms
* Speedup of 79%
* Generating 207 pages of content from Livesuit book:
* With progress bar UI updates:
* master: 24,250ms
* this PR: 8,063ms
* Speedup of 67%
* Without progress bar UI updates:
* master: 13,055ms
* this PR: 3,600ms
* Speedup of 72%
• What is the goal of this PR?
Implement a horizontal EPUB reading mode so books can be read in
landscape orientation (both 90° and 270°), while keeping the rest of the
UI in portrait.
• What changes are included?
◦ Rendering / Display
▪ Added an orientation model to GfxRenderer (Portrait, LandscapeNormal,
LandscapeFlipped) and made:
▪ drawPixel, drawImage, displayWindow map logical coordinates
differently depending on orientation.
▪ getScreenWidth() / getScreenHeight() return orientation‑aware logical
dimensions (480×800 in portrait, 800×480 in landscape).
◦ Settings / Configuration
▪ Extended CrossPointSettings with:
▪ landscapeReading (toggle for portrait vs. landscape EPUB reading).
▪ landscapeFlipped (toggle to flip landscape 180° so both horizontal
holding directions are supported).
▪ Updated settings serialization/deserialization to persist these fields
while remaining backward‑compatible with existing settings files.
▪ Updated SettingsActivity to expose two new toggles:
▪ “Landscape Reading”
▪ “Flip Landscape (swap top/bottom)”
◦ EPUB Reader
▪ In EpubReaderActivity:
▪ On onEnter, set GfxRenderer orientation based on the new settings
(Portrait, LandscapeNormal, or LandscapeFlipped).
▪ On onExit, reset orientation back to Portrait so Home, WiFi, Settings,
etc. continue to render as before.
▪ Adjusted renderStatusBar to position the status bar and battery
indicator relative to GfxRenderer::getScreenHeight() instead of
hard‑coded Y coordinates, so it stays correctly at the bottom in both
portrait and landscape.
◦ EPUB Caching / Layout
▪ Extended Section cache metadata (section.bin) to include the logical
screenWidth and screenHeight used when pages were generated; bumped
SECTION_FILE_VERSION.
▪ Updated loadCacheMetadata to compare:
▪ font/margins/line compression/extraParagraphSpacing and screen
dimensions; mismatches now invalidate and clear the cache.
▪ Updated persistPageDataToSD and all call sites in EpubReaderActivity
to pass the current GfxRenderer::getScreenWidth() / getScreenHeight() so
portrait and landscape caches are kept separate and correctly sized.
Additional Context
• Cache behavior / migration
◦ Existing section.bin files (old SECTION_FILE_VERSION) will be detected
as incompatible and their caches cleared and rebuilt once per chapter
when first opened after this change.
◦ Within a given orientation, caches will be reused as before. Switching
orientation (portrait ↔ landscape) will cause a one‑time re‑index of
each chapter in the new orientation.
• Scope and risks
◦ Orientation changes are scoped to the EPUB reader; the Home screen,
Settings, WiFi selection, sleep screens, and web server UI continue to
assume portrait orientation.
◦ The renderer’s orientation is a static/global setting; if future code
uses GfxRenderer outside the reader while a reader instance is active,
it should be aware that orientation is no longer implicitly fixed.
◦ All drawing primitives now go through orientation‑aware coordinate
transforms; any code that previously relied on edge‑case behavior or
out‑of‑bounds writes might surface as logged “Outside range” warnings
instead.
• Testing suggestions / areas to focus on
◦ Verify in hardware:
▪ Portrait mode still renders correctly (boot, home, settings, WiFi,
reader).
▪ Landscape reading in both directions:
▪ Landscape Reading = ON, Flip Landscape = OFF.
▪ Landscape Reading = ON, Flip Landscape = ON.
▪ Status bar (page X/Y, % progress, battery icon) is fully visible and
aligned at the bottom in all three combinations.
◦ Open the same book:
▪ In portrait first, then switch to landscape and reopen it.
▪ Confirm that:
▪ Old portrait caches are rebuilt once for landscape (you should see the
“Indexing…” page).
▪ Progress save/restore still works (resume opens to the correct page in
the current orientation).
◦ Ensure grayscale rendering (the secondary pass in
EpubReaderActivity::renderContents) still looks correct in both
orientations.
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* **What is the goal of this PR?**
Improve reliability and user experience during chapter indexing by
adding retry logic for SD card operations and a visual progress bar.
* **What changes are included?**
- **Retry logic**: Add 3 retry attempts with 50ms delay for ZIP to SD
card streaming to handle timing issues after display refresh
- **Progress bar**: Display a visual progress bar (0-100%) during
chapter indexing based on file read progress, updating every 10% to
balance responsiveness with e-ink display limitations
## Additional Context
* **Problem observed**: When navigating quickly through books with many
chapters (before chapter titles finish rendering), the "Indexing..."
screen would appear frozen. Checking the serial log revealed the
operation had silently failed, but the UI showed no indication of this.
Users would likely assume the device had crashed. Pressing the next
button again would resume operation, but this behavior was confusing and
unexpected.
* **Solution**:
- Retry logic handles transient SD card timing failures automatically,
so users don't need to manually retry
- Progress bar provides visual feedback so users know indexing is
actively working (not frozen)
* **Why timing issues occur**: After display refresh operations, there
can be timing conflicts when immediately starting SD card write
operations. This is more likely to happen when rapidly navigating
through chapters.
* **Progress bar design**: Updates every 10% to avoid excessive e-ink
refreshes while still providing meaningful feedback during long indexing
operations (especially for large chapters with CJK characters).
* **Performance**: Minimal overhead - progress calculation is simple
byte counting, and display updates use `FAST_REFRESH` mode.
## Summary
* **What is the goal of this PR?** Fixes a bug where text disappears
after approximately 25 pages in long chapters during EPUB indexing.
* **What changes are included?**
- Removed the `MAX_LINES = 1000` hard limit in
`ParsedText::computeLineBreaks()`
- Added safer infinite loop prevention by checking if `nextBreakIndex <=
currentWordIndex` and forcing advancement by one word when stuck
## Additional Context
* **Root cause:** The `MAX_LINES = 1000` limit was introduced to prevent
infinite loops, but it truncates content in long chapters. For example,
a 93KB chapter that generates ~242 pages (~9,680 lines) gets cut off at
~1000 lines, causing blank pages after page 25-27.
* **Solution approach:** Instead of a hard line limit, I now detect when
the line break algorithm gets stuck (when `nextBreakIndex` doesn't
advance) and force progress by moving one word at a time. This preserves
the infinite loop protection while allowing all content to be rendered.
* **Testing:** Verified with a Korean EPUB containing a 93KB chapter -
all 242 pages now render correctly without text disappearing.
