Add setting to enable status bar display options (#111)

Add setting toggle that allows status bar display options in EpubReader.

Supported options would be as follows: 

- FULL: display as is today
- PROGRESS: display progress bar only
- BATTERY: display battery only
- NONE: hide status bar

---------

Co-authored-by: Dave Allie <dave@daveallie.com>

lib/Epub/Epub/ParsedText.cpp

@@ -111,16 +111,17 @@ std::vector<size_t> ParsedText::computeLineBreaks(const int pageWidth, const int
   // Stores the index of the word that starts the next line (last_word_index + 1)
   std::vector<size_t> lineBreakIndices;
   size_t currentWordIndex = 0;
-  constexpr size_t MAX_LINES = 1000;
 
   while (currentWordIndex < totalWordCount) {
-    if (lineBreakIndices.size() >= MAX_LINES) {
+    size_t nextBreakIndex = ans[currentWordIndex] + 1;
-      break;
+
+    // Safety check: prevent infinite loop if nextBreakIndex doesn't advance
+    if (nextBreakIndex <= currentWordIndex) {
+      // Force advance by at least one word to avoid infinite loop
+      nextBreakIndex = currentWordIndex + 1;
     }
 
-    size_t nextBreakIndex = ans[currentWordIndex] + 1;
     lineBreakIndices.push_back(nextBreakIndex);
-
     currentWordIndex = nextBreakIndex;
   }
 

lib/GfxRenderer/Bitmap.cpp

@@ -3,6 +3,126 @@
 #include <cstdlib>
 #include <cstring>
 
+// ============================================================================
+// IMAGE PROCESSING OPTIONS - Toggle these to test different configurations
+// ============================================================================
+// Note: For cover images, dithering is done in JpegToBmpConverter.cpp
+// This file handles BMP reading - use simple quantization to avoid double-dithering
+constexpr bool USE_FLOYD_STEINBERG = false;  // Disabled - dithering done at JPEG conversion
+constexpr bool USE_NOISE_DITHERING = false;  // Hash-based noise dithering
+// Brightness adjustments:
+constexpr bool USE_BRIGHTNESS = false;    // true: apply brightness/gamma adjustments
+constexpr int BRIGHTNESS_BOOST = 20;      // Brightness offset (0-50), only if USE_BRIGHTNESS=true
+constexpr bool GAMMA_CORRECTION = false;  // Gamma curve, only if USE_BRIGHTNESS=true
+// ============================================================================
+
+// Integer approximation of gamma correction (brightens midtones)
+static inline int applyGamma(int gray) {
+  if (!GAMMA_CORRECTION) return gray;
+  const int product = gray * 255;
+  int x = gray;
+  if (x > 0) {
+    x = (x + product / x) >> 1;
+    x = (x + product / x) >> 1;
+  }
+  return x > 255 ? 255 : x;
+}
+
+// Simple quantization without dithering - just divide into 4 levels
+static inline uint8_t quantizeSimple(int gray) {
+  if (USE_BRIGHTNESS) {
+    gray += BRIGHTNESS_BOOST;
+    if (gray > 255) gray = 255;
+    gray = applyGamma(gray);
+  }
+  return static_cast<uint8_t>(gray >> 6);
+}
+
+// Hash-based noise dithering - survives downsampling without moiré artifacts
+static inline uint8_t quantizeNoise(int gray, int x, int y) {
+  if (USE_BRIGHTNESS) {
+    gray += BRIGHTNESS_BOOST;
+    if (gray > 255) gray = 255;
+    gray = applyGamma(gray);
+  }
+
+  uint32_t hash = static_cast<uint32_t>(x) * 374761393u + static_cast<uint32_t>(y) * 668265263u;
+  hash = (hash ^ (hash >> 13)) * 1274126177u;
+  const int threshold = static_cast<int>(hash >> 24);
+
+  const int scaled = gray * 3;
+  if (scaled < 255) {
+    return (scaled + threshold >= 255) ? 1 : 0;
+  } else if (scaled < 510) {
+    return ((scaled - 255) + threshold >= 255) ? 2 : 1;
+  } else {
+    return ((scaled - 510) + threshold >= 255) ? 3 : 2;
+  }
+}
+
+// Main quantization function
+static inline uint8_t quantize(int gray, int x, int y) {
+  if (USE_NOISE_DITHERING) {
+    return quantizeNoise(gray, x, y);
+  } else {
+    return quantizeSimple(gray);
+  }
+}
+
+// Floyd-Steinberg quantization with error diffusion and serpentine scanning
+// Returns 2-bit value (0-3) and updates error buffers
+static inline uint8_t quantizeFloydSteinberg(int gray, int x, int width, int16_t* errorCurRow, int16_t* errorNextRow,
+                                             bool reverseDir) {
+  // Add accumulated error to this pixel
+  int adjusted = gray + errorCurRow[x + 1];
+
+  // Clamp to valid range
+  if (adjusted < 0) adjusted = 0;
+  if (adjusted > 255) adjusted = 255;
+
+  // Quantize to 4 levels (0, 85, 170, 255)
+  uint8_t quantized;
+  int quantizedValue;
+  if (adjusted < 43) {
+    quantized = 0;
+    quantizedValue = 0;
+  } else if (adjusted < 128) {
+    quantized = 1;
+    quantizedValue = 85;
+  } else if (adjusted < 213) {
+    quantized = 2;
+    quantizedValue = 170;
+  } else {
+    quantized = 3;
+    quantizedValue = 255;
+  }
+
+  // Calculate error
+  int error = adjusted - quantizedValue;
+
+  // Distribute error to neighbors (serpentine: direction-aware)
+  if (!reverseDir) {
+    // Left to right
+    errorCurRow[x + 2] += (error * 7) >> 4;   // Right: 7/16
+    errorNextRow[x] += (error * 3) >> 4;      // Bottom-left: 3/16
+    errorNextRow[x + 1] += (error * 5) >> 4;  // Bottom: 5/16
+    errorNextRow[x + 2] += (error) >> 4;      // Bottom-right: 1/16
+  } else {
+    // Right to left (mirrored)
+    errorCurRow[x] += (error * 7) >> 4;       // Left: 7/16
+    errorNextRow[x + 2] += (error * 3) >> 4;  // Bottom-right: 3/16
+    errorNextRow[x + 1] += (error * 5) >> 4;  // Bottom: 5/16
+    errorNextRow[x] += (error) >> 4;          // Bottom-left: 1/16
+  }
+
+  return quantized;
+}
+
+Bitmap::~Bitmap() {
+  delete[] errorCurRow;
+  delete[] errorNextRow;
+}
+
 uint16_t Bitmap::readLE16(File& f) {
   const int c0 = f.read();
   const int c1 = f.read();
@@ -46,6 +166,8 @@ const char* Bitmap::errorToString(BmpReaderError err) {
       return "UnsupportedCompression (expected BI_RGB or BI_BITFIELDS for 32bpp)";
     case BmpReaderError::BadDimensions:
       return "BadDimensions";
+    case BmpReaderError::ImageTooLarge:
+      return "ImageTooLarge (max 2048x3072)";
     case BmpReaderError::PaletteTooLarge:
       return "PaletteTooLarge";
 
@@ -99,6 +221,13 @@ BmpReaderError Bitmap::parseHeaders() {
 
   if (width <= 0 || height <= 0) return BmpReaderError::BadDimensions;
 
+  // Safety limits to prevent memory issues on ESP32
+  constexpr int MAX_IMAGE_WIDTH = 2048;
+  constexpr int MAX_IMAGE_HEIGHT = 3072;
+  if (width > MAX_IMAGE_WIDTH || height > MAX_IMAGE_HEIGHT) {
+    return BmpReaderError::ImageTooLarge;
+  }
+
   // Pre-calculate Row Bytes to avoid doing this every row
   rowBytes = (width * bpp + 31) / 32 * 4;
 
@@ -115,21 +244,56 @@ BmpReaderError Bitmap::parseHeaders() {
     return BmpReaderError::SeekPixelDataFailed;
   }
 
+  // Allocate Floyd-Steinberg error buffers if enabled
+  if (USE_FLOYD_STEINBERG) {
+    delete[] errorCurRow;
+    delete[] errorNextRow;
+    errorCurRow = new int16_t[width + 2]();  // +2 for boundary handling
+    errorNextRow = new int16_t[width + 2]();
+    lastRowY = -1;
+  }
+
   return BmpReaderError::Ok;
 }
 
 // packed 2bpp output, 0 = black, 1 = dark gray, 2 = light gray, 3 = white
-BmpReaderError Bitmap::readRow(uint8_t* data, uint8_t* rowBuffer) const {
+BmpReaderError Bitmap::readRow(uint8_t* data, uint8_t* rowBuffer, int rowY) const {
   // Note: rowBuffer should be pre-allocated by the caller to size 'rowBytes'
   if (file.read(rowBuffer, rowBytes) != rowBytes) return BmpReaderError::ShortReadRow;
 
+  // Handle Floyd-Steinberg error buffer progression
+  const bool useFS = USE_FLOYD_STEINBERG && errorCurRow && errorNextRow;
+  if (useFS) {
+    // Check if we need to advance to next row (or reset if jumping)
+    if (rowY != lastRowY + 1 && rowY != 0) {
+      // Non-sequential row access - reset error buffers
+      memset(errorCurRow, 0, (width + 2) * sizeof(int16_t));
+      memset(errorNextRow, 0, (width + 2) * sizeof(int16_t));
+    } else if (rowY > 0) {
+      // Sequential access - swap buffers
+      int16_t* temp = errorCurRow;
+      errorCurRow = errorNextRow;
+      errorNextRow = temp;
+      memset(errorNextRow, 0, (width + 2) * sizeof(int16_t));
+    }
+    lastRowY = rowY;
+  }
+
   uint8_t* outPtr = data;
   uint8_t currentOutByte = 0;
   int bitShift = 6;
+  int currentX = 0;
 
   // Helper lambda to pack 2bpp color into the output stream
   auto packPixel = [&](const uint8_t lum) {
-    uint8_t color = (lum >> 6);  // Simple 2-bit reduction: 0-255 -> 0-3
+    uint8_t color;
+    if (useFS) {
+      // Floyd-Steinberg error diffusion
+      color = quantizeFloydSteinberg(lum, currentX, width, errorCurRow, errorNextRow, false);
+    } else {
+      // Simple quantization or noise dithering
+      color = quantize(lum, currentX, rowY);
+    }
     currentOutByte |= (color << bitShift);
     if (bitShift == 0) {
       *outPtr++ = currentOutByte;
@@ -138,6 +302,7 @@ BmpReaderError Bitmap::readRow(uint8_t* data, uint8_t* rowBuffer) const {
     } else {
       bitShift -= 2;
     }
+    currentX++;
   };
 
   uint8_t lum;
@@ -196,5 +361,12 @@ BmpReaderError Bitmap::rewindToData() const {
     return BmpReaderError::SeekPixelDataFailed;
   }
 
+  // Reset Floyd-Steinberg error buffers when rewinding
+  if (USE_FLOYD_STEINBERG && errorCurRow && errorNextRow) {
+    memset(errorCurRow, 0, (width + 2) * sizeof(int16_t));
+    memset(errorNextRow, 0, (width + 2) * sizeof(int16_t));
+    lastRowY = -1;
+  }
+
   return BmpReaderError::Ok;
 }

lib/GfxRenderer/Bitmap.h

@@ -15,6 +15,7 @@ enum class BmpReaderError : uint8_t {
   UnsupportedCompression,
 
   BadDimensions,
+  ImageTooLarge,
   PaletteTooLarge,
 
   SeekPixelDataFailed,
@@ -28,8 +29,9 @@ class Bitmap {
   static const char* errorToString(BmpReaderError err);
 
   explicit Bitmap(File& file) : file(file) {}
+  ~Bitmap();
   BmpReaderError parseHeaders();
-  BmpReaderError readRow(uint8_t* data, uint8_t* rowBuffer) const;
+  BmpReaderError readRow(uint8_t* data, uint8_t* rowBuffer, int rowY) const;
   BmpReaderError rewindToData() const;
   int getWidth() const { return width; }
   int getHeight() const { return height; }
@@ -49,4 +51,9 @@ class Bitmap {
   uint16_t bpp = 0;
   int rowBytes = 0;
   uint8_t paletteLum[256] = {};
+
+  // Floyd-Steinberg dithering state (mutable for const methods)
+  mutable int16_t* errorCurRow = nullptr;
+  mutable int16_t* errorNextRow = nullptr;
+  mutable int lastRowY = -1;  // Track row progression for error propagation
 };

lib/GfxRenderer/GfxRenderer.cpp

@@ -132,7 +132,9 @@ void GfxRenderer::drawBitmap(const Bitmap& bitmap, const int x, const int y, con
     isScaled = true;
   }
 
-  const uint8_t outputRowSize = (bitmap.getWidth() + 3) / 4;
+  // Calculate output row size (2 bits per pixel, packed into bytes)
+  // IMPORTANT: Use int, not uint8_t, to avoid overflow for images > 1020 pixels wide
+  const int outputRowSize = (bitmap.getWidth() + 3) / 4;
   auto* outputRow = static_cast<uint8_t*>(malloc(outputRowSize));
   auto* rowBytes = static_cast<uint8_t*>(malloc(bitmap.getRowBytes()));
 
@@ -154,7 +156,7 @@ void GfxRenderer::drawBitmap(const Bitmap& bitmap, const int x, const int y, con
       break;
     }
 
-    if (bitmap.readRow(outputRow, rowBytes) != BmpReaderError::Ok) {
+    if (bitmap.readRow(outputRow, rowBytes, bmpY) != BmpReaderError::Ok) {
       Serial.printf("[%lu] [GFX] Failed to read row %d from bitmap\n", millis(), bmpY);
       free(outputRow);
       free(rowBytes);

lib/JpegToBmpConverter/JpegToBmpConverter.cpp

@@ -13,24 +13,296 @@ struct JpegReadContext {
   size_t bufferFilled;
 };
 
-// Helper function: Convert 8-bit grayscale to 2-bit (0-3)
+// ============================================================================
-uint8_t JpegToBmpConverter::grayscaleTo2Bit(const uint8_t grayscale) {
+// IMAGE PROCESSING OPTIONS - Toggle these to test different configurations
-  // Simple threshold mapping:
+// ============================================================================
-  // 0-63 -> 0 (black)
+constexpr bool USE_8BIT_OUTPUT = false;  // true: 8-bit grayscale (no quantization), false: 2-bit (4 levels)
-  // 64-127 -> 1 (dark gray)
+// Dithering method selection (only one should be true, or all false for simple quantization):
-  // 128-191 -> 2 (light gray)
+constexpr bool USE_ATKINSON = true;          // Atkinson dithering (cleaner than F-S, less error diffusion)
-  // 192-255 -> 3 (white)
+constexpr bool USE_FLOYD_STEINBERG = false;  // Floyd-Steinberg error diffusion (can cause "worm" artifacts)
-  return grayscale >> 6;
+constexpr bool USE_NOISE_DITHERING = false;  // Hash-based noise dithering (good for downsampling)
+// Brightness/Contrast adjustments:
+constexpr bool USE_BRIGHTNESS = true;     // true: apply brightness/gamma adjustments
+constexpr int BRIGHTNESS_BOOST = 10;      // Brightness offset (0-50)
+constexpr bool GAMMA_CORRECTION = true;   // Gamma curve (brightens midtones)
+constexpr float CONTRAST_FACTOR = 1.15f;  // Contrast multiplier (1.0 = no change, >1 = more contrast)
+// Pre-resize to target display size (CRITICAL: avoids dithering artifacts from post-downsampling)
+constexpr bool USE_PRESCALE = true;     // true: scale image to target size before dithering
+constexpr int TARGET_MAX_WIDTH = 480;   // Max width for cover images (portrait display width)
+constexpr int TARGET_MAX_HEIGHT = 800;  // Max height for cover images (portrait display height)
+// ============================================================================
+
+// Integer approximation of gamma correction (brightens midtones)
+// Uses a simple curve: out = 255 * sqrt(in/255) ≈ sqrt(in * 255)
+static inline int applyGamma(int gray) {
+  if (!GAMMA_CORRECTION) return gray;
+  // Fast integer square root approximation for gamma ~0.5 (brightening)
+  // This brightens dark/mid tones while preserving highlights
+  const int product = gray * 255;
+  // Newton-Raphson integer sqrt (2 iterations for good accuracy)
+  int x = gray;
+  if (x > 0) {
+    x = (x + product / x) >> 1;
+    x = (x + product / x) >> 1;
+  }
+  return x > 255 ? 255 : x;
 }
 
+// Apply contrast adjustment around midpoint (128)
+// factor > 1.0 increases contrast, < 1.0 decreases
+static inline int applyContrast(int gray) {
+  // Integer-based contrast: (gray - 128) * factor + 128
+  // Using fixed-point: factor 1.15 ≈ 115/100
+  constexpr int factorNum = static_cast<int>(CONTRAST_FACTOR * 100);
+  int adjusted = ((gray - 128) * factorNum) / 100 + 128;
+  if (adjusted < 0) adjusted = 0;
+  if (adjusted > 255) adjusted = 255;
+  return adjusted;
+}
+
+// Combined brightness/contrast/gamma adjustment
+static inline int adjustPixel(int gray) {
+  if (!USE_BRIGHTNESS) return gray;
+
+  // Order: contrast first, then brightness, then gamma
+  gray = applyContrast(gray);
+  gray += BRIGHTNESS_BOOST;
+  if (gray > 255) gray = 255;
+  if (gray < 0) gray = 0;
+  gray = applyGamma(gray);
+
+  return gray;
+}
+
+// Simple quantization without dithering - just divide into 4 levels
+static inline uint8_t quantizeSimple(int gray) {
+  gray = adjustPixel(gray);
+  // Simple 2-bit quantization: 0-63=0, 64-127=1, 128-191=2, 192-255=3
+  return static_cast<uint8_t>(gray >> 6);
+}
+
+// Hash-based noise dithering - survives downsampling without moiré artifacts
+// Uses integer hash to generate pseudo-random threshold per pixel
+static inline uint8_t quantizeNoise(int gray, int x, int y) {
+  gray = adjustPixel(gray);
+
+  // Generate noise threshold using integer hash (no regular pattern to alias)
+  uint32_t hash = static_cast<uint32_t>(x) * 374761393u + static_cast<uint32_t>(y) * 668265263u;
+  hash = (hash ^ (hash >> 13)) * 1274126177u;
+  const int threshold = static_cast<int>(hash >> 24);  // 0-255
+
+  // Map gray (0-255) to 4 levels with dithering
+  const int scaled = gray * 3;
+
+  if (scaled < 255) {
+    return (scaled + threshold >= 255) ? 1 : 0;
+  } else if (scaled < 510) {
+    return ((scaled - 255) + threshold >= 255) ? 2 : 1;
+  } else {
+    return ((scaled - 510) + threshold >= 255) ? 3 : 2;
+  }
+}
+
+// Main quantization function - selects between methods based on config
+static inline uint8_t quantize(int gray, int x, int y) {
+  if (USE_NOISE_DITHERING) {
+    return quantizeNoise(gray, x, y);
+  } else {
+    return quantizeSimple(gray);
+  }
+}
+
+// Atkinson dithering - distributes only 6/8 (75%) of error for cleaner results
+// Error distribution pattern:
+//     X  1/8 1/8
+// 1/8 1/8 1/8
+//     1/8
+// Less error buildup = fewer artifacts than Floyd-Steinberg
+class AtkinsonDitherer {
+ public:
+  AtkinsonDitherer(int width) : width(width) {
+    errorRow0 = new int16_t[width + 4]();  // Current row
+    errorRow1 = new int16_t[width + 4]();  // Next row
+    errorRow2 = new int16_t[width + 4]();  // Row after next
+  }
+
+  ~AtkinsonDitherer() {
+    delete[] errorRow0;
+    delete[] errorRow1;
+    delete[] errorRow2;
+  }
+
+  uint8_t processPixel(int gray, int x) {
+    // Apply brightness/contrast/gamma adjustments
+    gray = adjustPixel(gray);
+
+    // Add accumulated error
+    int adjusted = gray + errorRow0[x + 2];
+    if (adjusted < 0) adjusted = 0;
+    if (adjusted > 255) adjusted = 255;
+
+    // Quantize to 4 levels
+    uint8_t quantized;
+    int quantizedValue;
+    if (adjusted < 43) {
+      quantized = 0;
+      quantizedValue = 0;
+    } else if (adjusted < 128) {
+      quantized = 1;
+      quantizedValue = 85;
+    } else if (adjusted < 213) {
+      quantized = 2;
+      quantizedValue = 170;
+    } else {
+      quantized = 3;
+      quantizedValue = 255;
+    }
+
+    // Calculate error (only distribute 6/8 = 75%)
+    int error = (adjusted - quantizedValue) >> 3;  // error/8
+
+    // Distribute 1/8 to each of 6 neighbors
+    errorRow0[x + 3] += error;  // Right
+    errorRow0[x + 4] += error;  // Right+1
+    errorRow1[x + 1] += error;  // Bottom-left
+    errorRow1[x + 2] += error;  // Bottom
+    errorRow1[x + 3] += error;  // Bottom-right
+    errorRow2[x + 2] += error;  // Two rows down
+
+    return quantized;
+  }
+
+  void nextRow() {
+    int16_t* temp = errorRow0;
+    errorRow0 = errorRow1;
+    errorRow1 = errorRow2;
+    errorRow2 = temp;
+    memset(errorRow2, 0, (width + 4) * sizeof(int16_t));
+  }
+
+  void reset() {
+    memset(errorRow0, 0, (width + 4) * sizeof(int16_t));
+    memset(errorRow1, 0, (width + 4) * sizeof(int16_t));
+    memset(errorRow2, 0, (width + 4) * sizeof(int16_t));
+  }
+
+ private:
+  int width;
+  int16_t* errorRow0;
+  int16_t* errorRow1;
+  int16_t* errorRow2;
+};
+
+// Floyd-Steinberg error diffusion dithering with serpentine scanning
+// Serpentine scanning alternates direction each row to reduce "worm" artifacts
+// Error distribution pattern (left-to-right):
+//       X   7/16
+// 3/16 5/16 1/16
+// Error distribution pattern (right-to-left, mirrored):
+// 1/16 5/16 3/16
+//      7/16  X
+class FloydSteinbergDitherer {
+ public:
+  FloydSteinbergDitherer(int width) : width(width), rowCount(0) {
+    errorCurRow = new int16_t[width + 2]();  // +2 for boundary handling
+    errorNextRow = new int16_t[width + 2]();
+  }
+
+  ~FloydSteinbergDitherer() {
+    delete[] errorCurRow;
+    delete[] errorNextRow;
+  }
+
+  // Process a single pixel and return quantized 2-bit value
+  // x is the logical x position (0 to width-1), direction handled internally
+  uint8_t processPixel(int gray, int x, bool reverseDirection) {
+    // Add accumulated error to this pixel
+    int adjusted = gray + errorCurRow[x + 1];
+
+    // Clamp to valid range
+    if (adjusted < 0) adjusted = 0;
+    if (adjusted > 255) adjusted = 255;
+
+    // Quantize to 4 levels (0, 85, 170, 255)
+    uint8_t quantized;
+    int quantizedValue;
+    if (adjusted < 43) {
+      quantized = 0;
+      quantizedValue = 0;
+    } else if (adjusted < 128) {
+      quantized = 1;
+      quantizedValue = 85;
+    } else if (adjusted < 213) {
+      quantized = 2;
+      quantizedValue = 170;
+    } else {
+      quantized = 3;
+      quantizedValue = 255;
+    }
+
+    // Calculate error
+    int error = adjusted - quantizedValue;
+
+    // Distribute error to neighbors (serpentine: direction-aware)
+    if (!reverseDirection) {
+      // Left to right: standard distribution
+      // Right: 7/16
+      errorCurRow[x + 2] += (error * 7) >> 4;
+      // Bottom-left: 3/16
+      errorNextRow[x] += (error * 3) >> 4;
+      // Bottom: 5/16
+      errorNextRow[x + 1] += (error * 5) >> 4;
+      // Bottom-right: 1/16
+      errorNextRow[x + 2] += (error) >> 4;
+    } else {
+      // Right to left: mirrored distribution
+      // Left: 7/16
+      errorCurRow[x] += (error * 7) >> 4;
+      // Bottom-right: 3/16
+      errorNextRow[x + 2] += (error * 3) >> 4;
+      // Bottom: 5/16
+      errorNextRow[x + 1] += (error * 5) >> 4;
+      // Bottom-left: 1/16
+      errorNextRow[x] += (error) >> 4;
+    }
+
+    return quantized;
+  }
+
+  // Call at the end of each row to swap buffers
+  void nextRow() {
+    // Swap buffers
+    int16_t* temp = errorCurRow;
+    errorCurRow = errorNextRow;
+    errorNextRow = temp;
+    // Clear the next row buffer
+    memset(errorNextRow, 0, (width + 2) * sizeof(int16_t));
+    rowCount++;
+  }
+
+  // Check if current row should be processed in reverse
+  bool isReverseRow() const { return (rowCount & 1) != 0; }
+
+  // Reset for a new image or MCU block
+  void reset() {
+    memset(errorCurRow, 0, (width + 2) * sizeof(int16_t));
+    memset(errorNextRow, 0, (width + 2) * sizeof(int16_t));
+    rowCount = 0;
+  }
+
+ private:
+  int width;
+  int rowCount;
+  int16_t* errorCurRow;
+  int16_t* errorNextRow;
+};
+
 inline void write16(Print& out, const uint16_t value) {
-  // out.write(reinterpret_cast<const uint8_t *>(&value), 2);
   out.write(value & 0xFF);
   out.write((value >> 8) & 0xFF);
 }
 
 inline void write32(Print& out, const uint32_t value) {
-  // out.write(reinterpret_cast<const uint8_t *>(&value), 4);
   out.write(value & 0xFF);
   out.write((value >> 8) & 0xFF);
   out.write((value >> 16) & 0xFF);
@@ -38,13 +310,49 @@ inline void write32(Print& out, const uint32_t value) {
 }
 
 inline void write32Signed(Print& out, const int32_t value) {
-  // out.write(reinterpret_cast<const uint8_t *>(&value), 4);
   out.write(value & 0xFF);
   out.write((value >> 8) & 0xFF);
   out.write((value >> 16) & 0xFF);
   out.write((value >> 24) & 0xFF);
 }
 
+// Helper function: Write BMP header with 8-bit grayscale (256 levels)
+void writeBmpHeader8bit(Print& bmpOut, const int width, const int height) {
+  // Calculate row padding (each row must be multiple of 4 bytes)
+  const int bytesPerRow = (width + 3) / 4 * 4;  // 8 bits per pixel, padded
+  const int imageSize = bytesPerRow * height;
+  const uint32_t paletteSize = 256 * 4;  // 256 colors * 4 bytes (BGRA)
+  const uint32_t fileSize = 14 + 40 + paletteSize + imageSize;
+
+  // BMP File Header (14 bytes)
+  bmpOut.write('B');
+  bmpOut.write('M');
+  write32(bmpOut, fileSize);
+  write32(bmpOut, 0);                      // Reserved
+  write32(bmpOut, 14 + 40 + paletteSize);  // Offset to pixel data
+
+  // DIB Header (BITMAPINFOHEADER - 40 bytes)
+  write32(bmpOut, 40);
+  write32Signed(bmpOut, width);
+  write32Signed(bmpOut, -height);  // Negative height = top-down bitmap
+  write16(bmpOut, 1);              // Color planes
+  write16(bmpOut, 8);              // Bits per pixel (8 bits)
+  write32(bmpOut, 0);              // BI_RGB (no compression)
+  write32(bmpOut, imageSize);
+  write32(bmpOut, 2835);  // xPixelsPerMeter (72 DPI)
+  write32(bmpOut, 2835);  // yPixelsPerMeter (72 DPI)
+  write32(bmpOut, 256);   // colorsUsed
+  write32(bmpOut, 256);   // colorsImportant
+
+  // Color Palette (256 grayscale entries x 4 bytes = 1024 bytes)
+  for (int i = 0; i < 256; i++) {
+    bmpOut.write(static_cast<uint8_t>(i));  // Blue
+    bmpOut.write(static_cast<uint8_t>(i));  // Green
+    bmpOut.write(static_cast<uint8_t>(i));  // Red
+    bmpOut.write(static_cast<uint8_t>(0));  // Reserved
+  }
+}
+
 // Helper function: Write BMP header with 2-bit color depth
 void JpegToBmpConverter::writeBmpHeader(Print& bmpOut, const int width, const int height) {
   // Calculate row padding (each row must be multiple of 4 bytes)
@@ -135,13 +443,59 @@ bool JpegToBmpConverter::jpegFileToBmpStream(File& jpegFile, Print& bmpOut) {
   Serial.printf("[%lu] [JPG] JPEG dimensions: %dx%d, components: %d, MCUs: %dx%d\n", millis(), imageInfo.m_width,
                 imageInfo.m_height, imageInfo.m_comps, imageInfo.m_MCUSPerRow, imageInfo.m_MCUSPerCol);
 
-  // Write BMP header
+  // Safety limits to prevent memory issues on ESP32
-  writeBmpHeader(bmpOut, imageInfo.m_width, imageInfo.m_height);
+  constexpr int MAX_IMAGE_WIDTH = 2048;
+  constexpr int MAX_IMAGE_HEIGHT = 3072;
+  constexpr int MAX_MCU_ROW_BYTES = 65536;
 
-  // Calculate row parameters
+  if (imageInfo.m_width > MAX_IMAGE_WIDTH || imageInfo.m_height > MAX_IMAGE_HEIGHT) {
-  const int bytesPerRow = (imageInfo.m_width * 2 + 31) / 32 * 4;
+    Serial.printf("[%lu] [JPG] Image too large (%dx%d), max supported: %dx%d\n", millis(), imageInfo.m_width,
+                  imageInfo.m_height, MAX_IMAGE_WIDTH, MAX_IMAGE_HEIGHT);
+    return false;
+  }
 
-  // Allocate row buffer for packed 2-bit pixels
+  // Calculate output dimensions (pre-scale to fit display exactly)
+  int outWidth = imageInfo.m_width;
+  int outHeight = imageInfo.m_height;
+  // Use fixed-point scaling (16.16) for sub-pixel accuracy
+  uint32_t scaleX_fp = 65536;  // 1.0 in 16.16 fixed point
+  uint32_t scaleY_fp = 65536;
+  bool needsScaling = false;
+
+  if (USE_PRESCALE && (imageInfo.m_width > TARGET_MAX_WIDTH || imageInfo.m_height > TARGET_MAX_HEIGHT)) {
+    // Calculate scale to fit within target dimensions while maintaining aspect ratio
+    const float scaleToFitWidth = static_cast<float>(TARGET_MAX_WIDTH) / imageInfo.m_width;
+    const float scaleToFitHeight = static_cast<float>(TARGET_MAX_HEIGHT) / imageInfo.m_height;
+    const float scale = (scaleToFitWidth < scaleToFitHeight) ? scaleToFitWidth : scaleToFitHeight;
+
+    outWidth = static_cast<int>(imageInfo.m_width * scale);
+    outHeight = static_cast<int>(imageInfo.m_height * scale);
+
+    // Ensure at least 1 pixel
+    if (outWidth < 1) outWidth = 1;
+    if (outHeight < 1) outHeight = 1;
+
+    // Calculate fixed-point scale factors (source pixels per output pixel)
+    // scaleX_fp = (srcWidth << 16) / outWidth
+    scaleX_fp = (static_cast<uint32_t>(imageInfo.m_width) << 16) / outWidth;
+    scaleY_fp = (static_cast<uint32_t>(imageInfo.m_height) << 16) / outHeight;
+    needsScaling = true;
+
+    Serial.printf("[%lu] [JPG] Pre-scaling %dx%d -> %dx%d (fit to %dx%d)\n", millis(), imageInfo.m_width,
+                  imageInfo.m_height, outWidth, outHeight, TARGET_MAX_WIDTH, TARGET_MAX_HEIGHT);
+  }
+
+  // Write BMP header with output dimensions
+  int bytesPerRow;
+  if (USE_8BIT_OUTPUT) {
+    writeBmpHeader8bit(bmpOut, outWidth, outHeight);
+    bytesPerRow = (outWidth + 3) / 4 * 4;
+  } else {
+    writeBmpHeader(bmpOut, outWidth, outHeight);
+    bytesPerRow = (outWidth * 2 + 31) / 32 * 4;
+  }
+
+  // Allocate row buffer
   auto* rowBuffer = static_cast<uint8_t*>(malloc(bytesPerRow));
   if (!rowBuffer) {
     Serial.printf("[%lu] [JPG] Failed to allocate row buffer\n", millis());
@@ -152,13 +506,48 @@ bool JpegToBmpConverter::jpegFileToBmpStream(File& jpegFile, Print& bmpOut) {
   // This is the minimal memory needed for streaming conversion
   const int mcuPixelHeight = imageInfo.m_MCUHeight;
   const int mcuRowPixels = imageInfo.m_width * mcuPixelHeight;
-  auto* mcuRowBuffer = static_cast<uint8_t*>(malloc(mcuRowPixels));
+
-  if (!mcuRowBuffer) {
+  // Validate MCU row buffer size before allocation
-    Serial.printf("[%lu] [JPG] Failed to allocate MCU row buffer\n", millis());
+  if (mcuRowPixels > MAX_MCU_ROW_BYTES) {
+    Serial.printf("[%lu] [JPG] MCU row buffer too large (%d bytes), max: %d\n", millis(), mcuRowPixels,
+                  MAX_MCU_ROW_BYTES);
     free(rowBuffer);
     return false;
   }
 
+  auto* mcuRowBuffer = static_cast<uint8_t*>(malloc(mcuRowPixels));
+  if (!mcuRowBuffer) {
+    Serial.printf("[%lu] [JPG] Failed to allocate MCU row buffer (%d bytes)\n", millis(), mcuRowPixels);
+    free(rowBuffer);
+    return false;
+  }
+
+  // Create ditherer if enabled (only for 2-bit output)
+  // Use OUTPUT dimensions for dithering (after prescaling)
+  AtkinsonDitherer* atkinsonDitherer = nullptr;
+  FloydSteinbergDitherer* fsDitherer = nullptr;
+  if (!USE_8BIT_OUTPUT) {
+    if (USE_ATKINSON) {
+      atkinsonDitherer = new AtkinsonDitherer(outWidth);
+    } else if (USE_FLOYD_STEINBERG) {
+      fsDitherer = new FloydSteinbergDitherer(outWidth);
+    }
+  }
+
+  // For scaling: accumulate source rows into scaled output rows
+  // We need to track which source Y maps to which output Y
+  // Using fixed-point: srcY_fp = outY * scaleY_fp (gives source Y in 16.16 format)
+  uint32_t* rowAccum = nullptr;    // Accumulator for each output X (32-bit for larger sums)
+  uint16_t* rowCount = nullptr;    // Count of source pixels accumulated per output X
+  int currentOutY = 0;             // Current output row being accumulated
+  uint32_t nextOutY_srcStart = 0;  // Source Y where next output row starts (16.16 fixed point)
+
+  if (needsScaling) {
+    rowAccum = new uint32_t[outWidth]();
+    rowCount = new uint16_t[outWidth]();
+    nextOutY_srcStart = scaleY_fp;  // First boundary is at scaleY_fp (source Y for outY=1)
+  }
+
   // Process MCUs row-by-row and write to BMP as we go (top-down)
   const int mcuPixelWidth = imageInfo.m_MCUWidth;
 
@@ -181,75 +570,164 @@ bool JpegToBmpConverter::jpegFileToBmpStream(File& jpegFile, Print& bmpOut) {
         return false;
       }
 
-      // Process MCU block into MCU row buffer
+      // picojpeg stores MCU data in 8x8 blocks
-      // MCUs are composed of 8x8 blocks. For 16x16 MCUs, there are four 8x8 blocks:
+      // Block layout: H2V2(16x16)=0,64,128,192 H2V1(16x8)=0,64 H1V2(8x16)=0,128
-      // Block layout for 16x16 MCU:  [0, 64]  (top row of blocks)
-      //                              [128, 192] (bottom row of blocks)
       for (int blockY = 0; blockY < mcuPixelHeight; blockY++) {
         for (int blockX = 0; blockX < mcuPixelWidth; blockX++) {
           const int pixelX = mcuX * mcuPixelWidth + blockX;
+          if (pixelX >= imageInfo.m_width) continue;
 
-          // Skip pixels outside image width (can happen with MCU alignment)
+          // Calculate proper block offset for picojpeg buffer
-          if (pixelX >= imageInfo.m_width) {
+          const int blockCol = blockX / 8;
-            continue;
+          const int blockRow = blockY / 8;
-          }
+          const int localX = blockX % 8;
+          const int localY = blockY % 8;
+          const int blocksPerRow = mcuPixelWidth / 8;
+          const int blockIndex = blockRow * blocksPerRow + blockCol;
+          const int pixelOffset = blockIndex * 64 + localY * 8 + localX;
 
-          // Calculate which 8x8 block and position within that block
-          const int block8x8Col = blockX / 8;  // 0 or 1 for 16-wide MCU
-          const int block8x8Row = blockY / 8;  // 0 or 1 for 16-tall MCU
-          const int pixelInBlockX = blockX % 8;
-          const int pixelInBlockY = blockY % 8;
-
-          // Calculate byte offset: each 8x8 block is 64 bytes
-          // Blocks are arranged: [0, 64], [128, 192]
-          const int blockOffset = (block8x8Row * (mcuPixelWidth / 8) + block8x8Col) * 64;
-          const int mcuIndex = blockOffset + pixelInBlockY * 8 + pixelInBlockX;
-
-          // Get grayscale value
           uint8_t gray;
           if (imageInfo.m_comps == 1) {
-            // Grayscale image
+            gray = imageInfo.m_pMCUBufR[pixelOffset];
-            gray = imageInfo.m_pMCUBufR[mcuIndex];
           } else {
-            // RGB image - convert to grayscale
+            const uint8_t r = imageInfo.m_pMCUBufR[pixelOffset];
-            const uint8_t r = imageInfo.m_pMCUBufR[mcuIndex];
+            const uint8_t g = imageInfo.m_pMCUBufG[pixelOffset];
-            const uint8_t g = imageInfo.m_pMCUBufG[mcuIndex];
+            const uint8_t b = imageInfo.m_pMCUBufB[pixelOffset];
-            const uint8_t b = imageInfo.m_pMCUBufB[mcuIndex];
+            gray = (r * 25 + g * 50 + b * 25) / 100;
-            // Luminance formula: Y = 0.299*R + 0.587*G + 0.114*B
-            // Using integer approximation: (30*R + 59*G + 11*B) / 100
-            gray = (r * 30 + g * 59 + b * 11) / 100;
           }
 
-          // Store grayscale value in MCU row buffer
           mcuRowBuffer[blockY * imageInfo.m_width + pixelX] = gray;
         }
       }
     }
 
-    // Write all pixel rows from this MCU row to BMP file
+    // Process source rows from this MCU row
     const int startRow = mcuY * mcuPixelHeight;
     const int endRow = (mcuY + 1) * mcuPixelHeight;
 
     for (int y = startRow; y < endRow && y < imageInfo.m_height; y++) {
-      memset(rowBuffer, 0, bytesPerRow);
+      const int bufferY = y - startRow;
 
-      // Pack 4 pixels per byte (2 bits each)
+      if (!needsScaling) {
-      for (int x = 0; x < imageInfo.m_width; x++) {
+        // No scaling - direct output (1:1 mapping)
-        const int bufferY = y - startRow;
+        memset(rowBuffer, 0, bytesPerRow);
-        const uint8_t gray = mcuRowBuffer[bufferY * imageInfo.m_width + x];
-        const uint8_t twoBit = grayscaleTo2Bit(gray);
 
-        const int byteIndex = (x * 2) / 8;
+        if (USE_8BIT_OUTPUT) {
-        const int bitOffset = 6 - ((x * 2) % 8);  // 6, 4, 2, 0
+          for (int x = 0; x < outWidth; x++) {
-        rowBuffer[byteIndex] |= (twoBit << bitOffset);
+            const uint8_t gray = mcuRowBuffer[bufferY * imageInfo.m_width + x];
+            rowBuffer[x] = adjustPixel(gray);
+          }
+        } else {
+          for (int x = 0; x < outWidth; x++) {
+            const uint8_t gray = mcuRowBuffer[bufferY * imageInfo.m_width + x];
+            uint8_t twoBit;
+            if (atkinsonDitherer) {
+              twoBit = atkinsonDitherer->processPixel(gray, x);
+            } else if (fsDitherer) {
+              twoBit = fsDitherer->processPixel(gray, x, fsDitherer->isReverseRow());
+            } else {
+              twoBit = quantize(gray, x, y);
+            }
+            const int byteIndex = (x * 2) / 8;
+            const int bitOffset = 6 - ((x * 2) % 8);
+            rowBuffer[byteIndex] |= (twoBit << bitOffset);
+          }
+          if (atkinsonDitherer)
+            atkinsonDitherer->nextRow();
+          else if (fsDitherer)
+            fsDitherer->nextRow();
+        }
+        bmpOut.write(rowBuffer, bytesPerRow);
+      } else {
+        // Fixed-point area averaging for exact fit scaling
+        // For each output pixel X, accumulate source pixels that map to it
+        // srcX range for outX: [outX * scaleX_fp >> 16, (outX+1) * scaleX_fp >> 16)
+        const uint8_t* srcRow = mcuRowBuffer + bufferY * imageInfo.m_width;
+
+        for (int outX = 0; outX < outWidth; outX++) {
+          // Calculate source X range for this output pixel
+          const int srcXStart = (static_cast<uint32_t>(outX) * scaleX_fp) >> 16;
+          const int srcXEnd = (static_cast<uint32_t>(outX + 1) * scaleX_fp) >> 16;
+
+          // Accumulate all source pixels in this range
+          int sum = 0;
+          int count = 0;
+          for (int srcX = srcXStart; srcX < srcXEnd && srcX < imageInfo.m_width; srcX++) {
+            sum += srcRow[srcX];
+            count++;
+          }
+
+          // Handle edge case: if no pixels in range, use nearest
+          if (count == 0 && srcXStart < imageInfo.m_width) {
+            sum = srcRow[srcXStart];
+            count = 1;
+          }
+
+          rowAccum[outX] += sum;
+          rowCount[outX] += count;
+        }
+
+        // Check if we've crossed into the next output row
+        // Current source Y in fixed point: y << 16
+        const uint32_t srcY_fp = static_cast<uint32_t>(y + 1) << 16;
+
+        // Output row when source Y crosses the boundary
+        if (srcY_fp >= nextOutY_srcStart && currentOutY < outHeight) {
+          memset(rowBuffer, 0, bytesPerRow);
+
+          if (USE_8BIT_OUTPUT) {
+            for (int x = 0; x < outWidth; x++) {
+              const uint8_t gray = (rowCount[x] > 0) ? (rowAccum[x] / rowCount[x]) : 0;
+              rowBuffer[x] = adjustPixel(gray);
+            }
+          } else {
+            for (int x = 0; x < outWidth; x++) {
+              const uint8_t gray = (rowCount[x] > 0) ? (rowAccum[x] / rowCount[x]) : 0;
+              uint8_t twoBit;
+              if (atkinsonDitherer) {
+                twoBit = atkinsonDitherer->processPixel(gray, x);
+              } else if (fsDitherer) {
+                twoBit = fsDitherer->processPixel(gray, x, fsDitherer->isReverseRow());
+              } else {
+                twoBit = quantize(gray, x, currentOutY);
+              }
+              const int byteIndex = (x * 2) / 8;
+              const int bitOffset = 6 - ((x * 2) % 8);
+              rowBuffer[byteIndex] |= (twoBit << bitOffset);
+            }
+            if (atkinsonDitherer)
+              atkinsonDitherer->nextRow();
+            else if (fsDitherer)
+              fsDitherer->nextRow();
+          }
+
+          bmpOut.write(rowBuffer, bytesPerRow);
+          currentOutY++;
+
+          // Reset accumulators for next output row
+          memset(rowAccum, 0, outWidth * sizeof(uint32_t));
+          memset(rowCount, 0, outWidth * sizeof(uint16_t));
+
+          // Update boundary for next output row
+          nextOutY_srcStart = static_cast<uint32_t>(currentOutY + 1) * scaleY_fp;
+        }
       }
-
-      // Write row with padding
-      bmpOut.write(rowBuffer, bytesPerRow);
     }
   }
 
   // Clean up
+  if (rowAccum) {
+    delete[] rowAccum;
+  }
+  if (rowCount) {
+    delete[] rowCount;
+  }
+  if (atkinsonDitherer) {
+    delete atkinsonDitherer;
+  }
+  if (fsDitherer) {
+    delete fsDitherer;
+  }
   free(mcuRowBuffer);
   free(rowBuffer);
 

lib/JpegToBmpConverter/JpegToBmpConverter.h

@@ -6,7 +6,7 @@ class ZipFile;
 
 class JpegToBmpConverter {
   static void writeBmpHeader(Print& bmpOut, int width, int height);
-  static uint8_t grayscaleTo2Bit(uint8_t grayscale);
+  // [COMMENTED OUT] static uint8_t grayscaleTo2Bit(uint8_t grayscale, int x, int y);
   static unsigned char jpegReadCallback(unsigned char* pBuf, unsigned char buf_size,
                                         unsigned char* pBytes_actually_read, void* pCallback_data);
 

src/CrossPointSettings.cpp

@@ -10,7 +10,7 @@ CrossPointSettings CrossPointSettings::instance;
 
 namespace {
 constexpr uint8_t SETTINGS_FILE_VERSION = 1;
-constexpr uint8_t SETTINGS_COUNT = 3;
+constexpr uint8_t SETTINGS_COUNT = 4;
 constexpr char SETTINGS_FILE[] = "/.crosspoint/settings.bin";
 }  // namespace
 
@@ -28,6 +28,7 @@ bool CrossPointSettings::saveToFile() const {
   serialization::writePod(outputFile, sleepScreen);
   serialization::writePod(outputFile, extraParagraphSpacing);
   serialization::writePod(outputFile, shortPwrBtn);
+  serialization::writePod(outputFile, statusBar);
   outputFile.close();
 
   Serial.printf("[%lu] [CPS] Settings saved to file\n", millis());
@@ -60,6 +61,8 @@ bool CrossPointSettings::loadFromFile() {
     if (++settingsRead >= fileSettingsCount) break;
     serialization::readPod(inputFile, shortPwrBtn);
     if (++settingsRead >= fileSettingsCount) break;
+    serialization::readPod(inputFile, statusBar);
+    if (++settingsRead >= fileSettingsCount) break;
   } while (false);
 
   inputFile.close();

src/CrossPointSettings.h

@@ -18,8 +18,13 @@ class CrossPointSettings {
   // Should match with SettingsActivity text
   enum SLEEP_SCREEN_MODE { DARK = 0, LIGHT = 1, CUSTOM = 2, COVER = 3 };
 
+  // Status bar display type enum
+  enum STATUS_BAR_MODE { NONE = 0, NO_PROGRESS = 1, FULL = 2 };
+
   // Sleep screen settings
   uint8_t sleepScreen = DARK;
+  // Status bar settings
+  uint8_t statusBar = FULL;
   // Text rendering settings
   uint8_t extraParagraphSpacing = 1;
   // Duration of the power button press

src/activities/reader/EpubReaderActivity.cpp

@@ -340,71 +340,87 @@ void EpubReaderActivity::renderContents(std::unique_ptr<Page> page) {
 }
 
 void EpubReaderActivity::renderStatusBar() const {
+  // determine visible status bar elements
+  const bool showProgress = SETTINGS.statusBar == CrossPointSettings::STATUS_BAR_MODE::FULL;
+  const bool showBattery = SETTINGS.statusBar == CrossPointSettings::STATUS_BAR_MODE::NO_PROGRESS ||
+                           SETTINGS.statusBar == CrossPointSettings::STATUS_BAR_MODE::FULL;
+  const bool showChapterTitle = SETTINGS.statusBar == CrossPointSettings::STATUS_BAR_MODE::NO_PROGRESS ||
+                                SETTINGS.statusBar == CrossPointSettings::STATUS_BAR_MODE::FULL;
+
+  // height variable shared by all elements
   constexpr auto textY = 776;
+  int percentageTextWidth = 0;
+  int progressTextWidth = 0;
 
-  // Calculate progress in book
+  if (showProgress) {
-  const float sectionChapterProg = static_cast<float>(section->currentPage) / section->pageCount;
+    // Calculate progress in book
-  const uint8_t bookProgress = epub->calculateProgress(currentSpineIndex, sectionChapterProg);
+    const float sectionChapterProg = static_cast<float>(section->currentPage) / section->pageCount;
+    const uint8_t bookProgress = epub->calculateProgress(currentSpineIndex, sectionChapterProg);
 
-  // Right aligned text for progress counter
+    // Right aligned text for progress counter
-  const std::string progress = std::to_string(section->currentPage + 1) + "/" + std::to_string(section->pageCount) +
+    const std::string progress = std::to_string(section->currentPage + 1) + "/" + std::to_string(section->pageCount) +
-                               "  " + std::to_string(bookProgress) + "%";
+                                 "  " + std::to_string(bookProgress) + "%";
-  const auto progressTextWidth = renderer.getTextWidth(SMALL_FONT_ID, progress.c_str());
+    progressTextWidth = renderer.getTextWidth(SMALL_FONT_ID, progress.c_str());
-  renderer.drawText(SMALL_FONT_ID, GfxRenderer::getScreenWidth() - marginRight - progressTextWidth, textY,
+    renderer.drawText(SMALL_FONT_ID, GfxRenderer::getScreenWidth() - marginRight - progressTextWidth, textY,
-                    progress.c_str());
+                      progress.c_str());
-
-  // Left aligned battery icon and percentage
-  const uint16_t percentage = battery.readPercentage();
-  const auto percentageText = std::to_string(percentage) + "%";
-  const auto percentageTextWidth = renderer.getTextWidth(SMALL_FONT_ID, percentageText.c_str());
-  renderer.drawText(SMALL_FONT_ID, 20 + marginLeft, textY, percentageText.c_str());
-
-  // 1 column on left, 2 columns on right, 5 columns of battery body
-  constexpr int batteryWidth = 15;
-  constexpr int batteryHeight = 10;
-  constexpr int x = marginLeft;
-  constexpr int y = 783;
-
-  // Top line
-  renderer.drawLine(x, y, x + batteryWidth - 4, y);
-  // Bottom line
-  renderer.drawLine(x, y + batteryHeight - 1, x + batteryWidth - 4, y + batteryHeight - 1);
-  // Left line
-  renderer.drawLine(x, y, x, y + batteryHeight - 1);
-  // Battery end
-  renderer.drawLine(x + batteryWidth - 4, y, x + batteryWidth - 4, y + batteryHeight - 1);
-  renderer.drawLine(x + batteryWidth - 3, y + 2, x + batteryWidth - 1, y + 2);
-  renderer.drawLine(x + batteryWidth - 3, y + batteryHeight - 3, x + batteryWidth - 1, y + batteryHeight - 3);
-  renderer.drawLine(x + batteryWidth - 1, y + 2, x + batteryWidth - 1, y + batteryHeight - 3);
-
-  // The +1 is to round up, so that we always fill at least one pixel
-  int filledWidth = percentage * (batteryWidth - 5) / 100 + 1;
-  if (filledWidth > batteryWidth - 5) {
-    filledWidth = batteryWidth - 5;  // Ensure we don't overflow
   }
-  renderer.fillRect(x + 1, y + 1, filledWidth, batteryHeight - 2);
 
-  // Centered chatper title text
+  if (showBattery) {
-  // Page width minus existing content with 30px padding on each side
+    // Left aligned battery icon and percentage
-  const int titleMarginLeft = 20 + percentageTextWidth + 30 + marginLeft;
+    const uint16_t percentage = battery.readPercentage();
-  const int titleMarginRight = progressTextWidth + 30 + marginRight;
+    const auto percentageText = std::to_string(percentage) + "%";
-  const int availableTextWidth = GfxRenderer::getScreenWidth() - titleMarginLeft - titleMarginRight;
+    percentageTextWidth = renderer.getTextWidth(SMALL_FONT_ID, percentageText.c_str());
-  const int tocIndex = epub->getTocIndexForSpineIndex(currentSpineIndex);
+    renderer.drawText(SMALL_FONT_ID, 20 + marginLeft, textY, percentageText.c_str());
 
-  std::string title;
+    // 1 column on left, 2 columns on right, 5 columns of battery body
-  int titleWidth;
+    constexpr int batteryWidth = 15;
-  if (tocIndex == -1) {
+    constexpr int batteryHeight = 10;
-    title = "Unnamed";
+    constexpr int x = marginLeft;
-    titleWidth = renderer.getTextWidth(SMALL_FONT_ID, "Unnamed");
+    constexpr int y = 783;
-  } else {
+
-    const auto tocItem = epub->getTocItem(tocIndex);
+    // Top line
-    title = tocItem.title;
+    renderer.drawLine(x, y, x + batteryWidth - 4, y);
-    titleWidth = renderer.getTextWidth(SMALL_FONT_ID, title.c_str());
+    // Bottom line
-    while (titleWidth > availableTextWidth && title.length() > 11) {
+    renderer.drawLine(x, y + batteryHeight - 1, x + batteryWidth - 4, y + batteryHeight - 1);
-      title.replace(title.length() - 8, 8, "...");
+    // Left line
-      titleWidth = renderer.getTextWidth(SMALL_FONT_ID, title.c_str());
+    renderer.drawLine(x, y, x, y + batteryHeight - 1);
+    // Battery end
+    renderer.drawLine(x + batteryWidth - 4, y, x + batteryWidth - 4, y + batteryHeight - 1);
+    renderer.drawLine(x + batteryWidth - 3, y + 2, x + batteryWidth - 1, y + 2);
+    renderer.drawLine(x + batteryWidth - 3, y + batteryHeight - 3, x + batteryWidth - 1, y + batteryHeight - 3);
+    renderer.drawLine(x + batteryWidth - 1, y + 2, x + batteryWidth - 1, y + batteryHeight - 3);
+
+    // The +1 is to round up, so that we always fill at least one pixel
+    int filledWidth = percentage * (batteryWidth - 5) / 100 + 1;
+    if (filledWidth > batteryWidth - 5) {
+      filledWidth = batteryWidth - 5;  // Ensure we don't overflow
     }
+    renderer.fillRect(x + 1, y + 1, filledWidth, batteryHeight - 2);
   }
 
-  renderer.drawText(SMALL_FONT_ID, titleMarginLeft + (availableTextWidth - titleWidth) / 2, textY, title.c_str());
+  if (showChapterTitle) {
+    // Centered chatper title text
+    // Page width minus existing content with 30px padding on each side
+    const int titleMarginLeft = 20 + percentageTextWidth + 30 + marginLeft;
+    const int titleMarginRight = progressTextWidth + 30 + marginRight;
+    const int availableTextWidth = GfxRenderer::getScreenWidth() - titleMarginLeft - titleMarginRight;
+    const int tocIndex = epub->getTocIndexForSpineIndex(currentSpineIndex);
+
+    std::string title;
+    int titleWidth;
+    if (tocIndex == -1) {
+      title = "Unnamed";
+      titleWidth = renderer.getTextWidth(SMALL_FONT_ID, "Unnamed");
+    } else {
+      const auto tocItem = epub->getTocItem(tocIndex);
+      title = tocItem.title;
+      titleWidth = renderer.getTextWidth(SMALL_FONT_ID, title.c_str());
+      while (titleWidth > availableTextWidth && title.length() > 11) {
+        title.replace(title.length() - 8, 8, "...");
+        titleWidth = renderer.getTextWidth(SMALL_FONT_ID, title.c_str());
+      }
+    }
+
+    renderer.drawText(SMALL_FONT_ID, titleMarginLeft + (availableTextWidth - titleWidth) / 2, textY, title.c_str());
+  }
 }

src/activities/reader/FileSelectionActivity.cpp

@@ -162,7 +162,7 @@ void FileSelectionActivity::render() const {
   renderer.drawCenteredText(READER_FONT_ID, 10, "Books", true, BOLD);
 
   // Help text
-  renderer.drawButtonHints(UI_FONT_ID, "« Home", "", "", "");
+  renderer.drawButtonHints(UI_FONT_ID, "« Home", "Open", "", "");
 
   if (files.empty()) {
     renderer.drawText(UI_FONT_ID, 20, 60, "No EPUBs found");

src/activities/settings/SettingsActivity.cpp

@@ -9,10 +9,11 @@
 
 // Define the static settings list
 namespace {
-constexpr int settingsCount = 4;
+constexpr int settingsCount = 5;
 const SettingInfo settingsList[settingsCount] = {
     // Should match with SLEEP_SCREEN_MODE
     {"Sleep Screen", SettingType::ENUM, &CrossPointSettings::sleepScreen, {"Dark", "Light", "Custom", "Cover"}},
+    {"Status Bar", SettingType::ENUM, &CrossPointSettings::statusBar, {"None", "No Progress", "Full"}},
     {"Extra Paragraph Spacing", SettingType::TOGGLE, &CrossPointSettings::extraParagraphSpacing, {}},
     {"Short Power Button Click", SettingType::TOGGLE, &CrossPointSettings::shortPwrBtn, {}},
     {"Check for updates", SettingType::ACTION, nullptr, {}},