Xteink-X4-crosspoint-reader/src/main.cpp

#include <Arduino.h>
#include <EpdRenderer.h>
#include <Epub.h>
#include <GxEPD2_BW.h>
#include <SD.h>
#include <SPI.h>

#include "Battery.h"
#include "CrossPointState.h"
#include "Input.h"
#include "screens/EpubReaderScreen.h"
#include "screens/FileSelectionScreen.h"
#include "screens/FullScreenMessageScreen.h"

#define SPI_FQ 40000000
// Display SPI pins (custom pins for XteinkX4, not hardware SPI defaults)
#define EPD_SCLK 8   // SPI Clock
#define EPD_MOSI 10  // SPI MOSI (Master Out Slave In)
#define EPD_CS 21    // Chip Select
#define EPD_DC 4     // Data/Command
#define EPD_RST 5    // Reset
#define EPD_BUSY 6   // Busy

#define UART0_RXD 20  // Used for USB connection detection

#define SD_SPI_CS 12
#define SD_SPI_MISO 7

GxEPD2_BW<GxEPD2_426_GDEQ0426T82, GxEPD2_426_GDEQ0426T82::HEIGHT> display(GxEPD2_426_GDEQ0426T82(EPD_CS, EPD_DC,
                                                                                                 EPD_RST, EPD_BUSY));
auto renderer = new EpdRenderer(&display);
Screen* currentScreen;
CrossPointState* appState;

// Power button timing
// Time required to confirm boot from sleep
constexpr unsigned long POWER_BUTTON_WAKEUP_MS = 1500;
// Time required to enter sleep mode
constexpr unsigned long POWER_BUTTON_SLEEP_MS = 1000;

Epub* loadEpub(const std::string& path) {
  if (!SD.exists(path.c_str())) {
    Serial.println("File does not exist");
    return nullptr;
  }

  const auto epub = new Epub(path, "/.crosspoint");
  if (epub->load()) {
    return epub;
  }

  Serial.println("Failed to load epub");
  free(epub);
  return nullptr;
}

void enterNewScreen(Screen* screen) {
  if (currentScreen) {
    currentScreen->onExit();
    delete currentScreen;
  }
  currentScreen = screen;
  currentScreen->onEnter();
}

// Verify long press on wake-up from deep sleep
void verifyWakeupLongPress() {
  const auto input = getInput();

  if (input.button == POWER && input.pressTime > POWER_BUTTON_WAKEUP_MS) {
    // Button released too early. Returning to sleep.
    // IMPORTANT: Re-arm the wakeup trigger before sleeping again
    esp_deep_sleep_enable_gpio_wakeup(1ULL << BTN_GPIO3, ESP_GPIO_WAKEUP_GPIO_LOW);
    esp_deep_sleep_start();
  }
}

// Enter deep sleep mode
void enterDeepSleep() {
  enterNewScreen(new FullScreenMessageScreen(renderer, "Sleeping", true, false, true));

  Serial.println("Power button released after a long press. Entering deep sleep.");
  delay(2000);  // Allow Serial buffer to empty and display to update

  // Enable Wakeup on LOW (button press)
  esp_deep_sleep_enable_gpio_wakeup(1ULL << BTN_GPIO3, ESP_GPIO_WAKEUP_GPIO_LOW);

  display.hibernate();

  // Enter Deep Sleep
  esp_deep_sleep_start();
}

void setupSerial() {
  Serial.begin(115200);
  // Wait for serial monitor
  const unsigned long start = millis();
  while (!Serial && (millis() - start) < 3000) {
    delay(10);
  }

  if (Serial) {
    // delay for monitor to start reading
    delay(1000);
  }
}

void onGoHome();
void onSelectEpubFile(const std::string& path) {
  enterNewScreen(new FullScreenMessageScreen(renderer, "Loading..."));

  Epub* epub = loadEpub(path);
  if (epub) {
    appState->openEpubPath = path;
    appState->saveToFile();
    enterNewScreen(new EpubReaderScreen(renderer, epub, onGoHome));
  } else {
    enterNewScreen(new FullScreenMessageScreen(renderer, "Failed to load epub"));
  }
}
void onGoHome() { enterNewScreen(new FileSelectionScreen(renderer, onSelectEpubFile)); }

void setup() {
  setupInputPinModes();

  // Check if boot was triggered by the Power Button (Deep Sleep Wakeup)
  // If triggered by RST pin or Battery insertion, this will be false, allowing
  // normal boot.
  if (esp_sleep_get_wakeup_cause() == ESP_SLEEP_WAKEUP_GPIO) {
    verifyWakeupLongPress();
  }

  setupSerial();

  // Initialize pins
  pinMode(BAT_GPIO0, INPUT);

  // Initialize SPI with custom pins
  SPI.begin(EPD_SCLK, SD_SPI_MISO, EPD_MOSI, EPD_CS);

  // Initialize display
  const SPISettings spi_settings(SPI_FQ, MSBFIRST, SPI_MODE0);
  display.init(115200, true, 2, false, SPI, spi_settings);
  display.setRotation(3);  // 270 degrees
  display.setTextColor(GxEPD_BLACK);
  Serial.println("Display initialized");

  enterNewScreen(new FullScreenMessageScreen(renderer, "Booting...", true));

  // SD Card Initialization
  SD.begin(SD_SPI_CS, SPI, SPI_FQ);

  appState = CrossPointState::loadFromFile();
  if (!appState->openEpubPath.empty()) {
    Epub* epub = loadEpub(appState->openEpubPath);
    if (epub) {
      enterNewScreen(new EpubReaderScreen(renderer, epub, onGoHome));
      return;
    }
  }

  enterNewScreen(new FileSelectionScreen(renderer, onSelectEpubFile));
}

void loop() {
  delay(50);

  const Input input = getInput();

  if (input.button == NONE) {
    return;
  }

  if (input.button == POWER && input.pressTime > POWER_BUTTON_SLEEP_MS) {
    enterDeepSleep();
    // This should never be hit as `enterDeepSleep` calls esp_deep_sleep_start
    delay(1000);
    return;
  }

  if (currentScreen) {
    currentScreen->handleInput(input);
  }
}