## Summary
* Use single unified cache file for book spine, table of contents, and
core metadata (title, author, cover image)
* Use new temp item store file in OPF parsing to store items to be
rescaned when parsing spine
* This avoids us holding these items in memory
* Use new toc.bin.tmp and spine.bin.tmp to build out partial toc / spine
data as part of parsing content.opf and the NCX file
* These files are re-read multiple times to ultimately build book.bin
## Additional Context
* Spec for file format included below as an image
* This should help with:
* #10
* #60
* #99
## Summary
* Prevent SD card error causing boot loop
* We need the screen and fonts to be initialized to show the full screen
error message
* Prior to this change, trying to render the font would crash the
firmware and boot loop it
## Summary
* Handle 16x16 MCU blocks in JPEG decoding
* We were only correctly handling 8x8 blocks, which means that we did
not correctly support a lot of JPGs leading to an interlacing style on
the images
## Additional Context
* Fixes https://github.com/daveallie/crosspoint-reader/issues/118
## Summary
* **What is the goal of this PR?** Adds WiFi Access Point (AP) mode
support for File Transfer, allowing the device to create its own WiFi
network that users can connect to directly - useful when no existing
WiFi network is available. And in my experience is faster when the
device is right next to your laptop (but maybe further from your wifi)
* **What changes are included?**
- New `NetworkModeSelectionActivity` - an interstitial screen asking
users to choose between:
- "Join a Network" - connects to an existing WiFi network (existing
behavior)
- "Create Hotspot" - creates a WiFi access point named
"CrossPoint-Reader"
- Modified `CrossPointWebServerActivity` to:
- Launch the network mode selection screen before proceeding
- Support starting an Access Point with mDNS (`crosspoint.local`) and
DNS server for captive portal behavior
- Display appropriate connection info for both modes
- Modified `CrossPointWebServer` to support starting when WiFi is in AP
mode (not just STA connected mode)
## Additional Context
* **AP Mode Details**: The device creates an open WiFi network named
"CrossPoint-Reader". Once connected, users can access the file transfer
page at `http://crosspoint.local/` or `http://192.168.4.1/`
* **DNS Captive Portal**: A DNS server redirects all domain requests to
the device's IP, enabling captive portal behavior on some devices
* **mDNS**: Hostname resolution via `crosspoint.local` is enabled for
both AP and STA modes
* **No breaking changes**: The "Join a Network" option preserves the
existing WiFi connection flow
* **Memory impact**: Minimal - the AP mode uses roughly the same
resources as STA mode
## Summary
* Adds support for OTA
* Gets latest firmware bin from latest GitHub release
* I have noticed it be a little flaky unpacking the JSON and
occasionally failing to start
## Summary
* HTML files are now static, streamed directly to the client without
modification
* For any dynamic values, load via JSON APIs
* For files page, we stream the JSON content as we scan the directory to
avoid holding onto too much data
## Additional details
* We were previously building up a very large string all generated on
the X4 directly, we should be leveraging the browser
* Fixes https://github.com/daveallie/crosspoint-reader/issues/94
Improves the duration for which the power button needs to be held - see
#53.
I left the measurement code for the calibration value in, as it will
likely change if we move the settings to NVS.
## Summary
* Give activities name and log when entering and exiting them
* Clearer logs when attempting to debug, knowing where users are coming
from/going to helps
## Summary
* Swap from `wasReleased` to `isPressed` when checking power button
duration
* In practice it makes the power down experience feel a lot snappier
* Remove the unnecessary 1000ms delay when powering off
## Additional Context
* A little discussion in here:
https://github.com/daveallie/crosspoint-reader/discussions/53#discussioncomment-15309707
## Summary
* adds cyrillic glyphs to pixel arial font, used as Small font in UI
## Additional Context
* with recent changes pixel arial font lost cyrillic glyphs
## Summary
* Fix incorrect justification of last line in paragraph
* `words` is changing size due to the slice, so `isLastLine` would
rarely be right, either removing justification mid-paragraph, or
including it in the last line.
## Additional Context
* Introduced in #73
## Summary
* Unset openEpubPath on boot and set once epub fully loaded
## Additional Context
* If an epub was crashing when loading, it was possible to get the
device stuck into a loop. There was no way to get back to the home
screen as we'd always load you back into old epub
* Break this loop by clearing the stored value when we boot, still
jumping to the last open epub, but only resetting that value once the
epub has been fully loaded
## Summary
- Add basic JPG image support
- Map JPG back to 2-bit BMP output
- Can be used to later render the BMP file from disk or directly pass to
output if wanted
- Give the 3 passes over the data needed to render grayscale content,
putting it on disk is preferred to outputting it multiple times
## Additional Context
- WIP, looking forward to BMP support from
https://github.com/daveallie/crosspoint-reader/pull/16
- Addresses some of #11
## Summary
* Paginate book list
* Avoid out of bounds rendering of long book titles, truncate with
ellipsis instead
## Additional Context
* Should partially help with
https://github.com/daveallie/crosspoint-reader/issues/75 as it was
previously rendering a lot of content off screen, will need to test with
a large directory
## Summary
* Extract EPUB TOC into temp file before parsing
* Streaming ZIP -> XML parser uses up a lot of memory as we're
allocating inflation buffers while also holding a few copies of the
buffer in different forms
* Instead, but streaming the inflated file down to the SD card (like we
do for HTML parsing, we can lower memory usage)
## Additional Context
* This should help with
https://github.com/daveallie/crosspoint-reader/issues/60 and
https://github.com/daveallie/crosspoint-reader/issues/10. It won't
remove those class of issues completely, but will allow for many more
books to be opened.
Still a bit raw, but gets the time required to determine the size of
each chapter (for reading progress) down from ~25ms to 0-1ms.
This is done by keeping the zipArchive open (so simple ;)).
Probably we don't need to cache the spine sizes anymore then...
---------
Co-authored-by: Dave Allie <dave@daveallie.com>
## Summary
* Build out lines for pages when holding over 750 buffered words
* Should fix issues with parsing long blocks of text causing memory
crashes
## Problem
`drawBmp()` allocates two row buffers via `malloc()` but doesn't check
if allocations succeed. On low memory, this causes a crash when the NULL
pointers are dereferenced.
## Fix
Add NULL check after both `malloc()` calls. If either fails, log error
and return early.
Changed `lib/GfxRenderer/GfxRenderer.cpp`.
## Test
- Defensive addition only - no logic changes
- Manual device testing appreciated
## Problem
Three Epub getter functions can throw exceptions:
- `getCumulativeSpineItemSize()`: No bounds check before
`.at(spineIndex)`
- `getSpineItem()`: If spine is empty and index invalid, `.at(0)` throws
- `getTocItem()`: If toc is empty and index invalid, `.at(0)` throws
## Fix
- Add bounds check to `getCumulativeSpineItemSize()`, return 0 on error
- Add empty container checks to `getSpineItem()` and `getTocItem()`
- Use static fallback objects for safe reference returns on empty
containers
Changed `lib/Epub/Epub.cpp`.
## Test
- Defensive additions - follows existing bounds check patterns
- No logic changes for valid inputs
- Manual device testing appreciated
## Problem
`readFileToMemory()` allocates an output buffer via `malloc()` at line
120 but doesn't check if allocation succeeds. On low memory, the NULL
pointer is passed to `fread()` causing a crash.
## Fix
Add NULL check after `malloc()` for the output buffer. Follows the
existing pattern already used for `deflatedData` at line 141.
Changed `lib/ZipFile/ZipFile.cpp`.
## Test
- Follows existing validated pattern from same function
- Defensive addition only - no logic changes
