mirror of
https://github.com/daveallie/crosspoint-reader.git
synced 2025-12-18 15:17:42 +03:00
139 lines
5.0 KiB
Markdown
139 lines
5.0 KiB
Markdown
# CrossPoint Reader
|
|
|
|
Firmware for the **Xteink X4** e-paper display reader (unaffiliated with Xteink).
|
|
Built using **PlatformIO** and targeting the **ESP32-C3** microcontroller.
|
|
|
|
CrossPoint Reader is a purpose-built firmware designed to be a drop-in, fully open-source replacement for the official
|
|
Xteink firmware. It aims to match or improve upon the standard EPUB reading experience.
|
|
|
|
|
|
|
|
## Motivation
|
|
|
|
E-paper devices are fantastic for reading, but most commercially available readers are closed systems with limited
|
|
customisation. The **Xteink X4** is an affordable, e-paper device, however the official firmware remains closed.
|
|
CrossPoint exists partly as a fun side-project and partly to open up the ecosystem and truely unlock the device's
|
|
potential.
|
|
|
|
CrossPoint Reader aims to:
|
|
* Provide a **fully open-source alternative** to the official firmware.
|
|
* Offer a **document reader** capable of handling EPUB content on constrained hardware.
|
|
* Support **customisable font, layout, and display** options.
|
|
* Run purely on the **Xteink X4 hardware**.
|
|
|
|
This project is **not affiliated with Xteink**; it's built as a community project.
|
|
|
|
## Features
|
|
|
|
- [x] EPUB parsing and rendering
|
|
- [x] Saved reading position
|
|
- [ ] File explorer with file picker
|
|
- [x] Basic EPUB picker from root directory
|
|
- [x] Support nested folders
|
|
- [ ] EPUB picker with cover art
|
|
- [ ] Image support within EPUB
|
|
- [ ] Configurable font, layout, and display options
|
|
- [ ] WiFi connectivity
|
|
- [ ] BLE connectivity
|
|
|
|
## Getting Started
|
|
|
|
### Prerequisites
|
|
|
|
* **PlatformIO Core** (`pio`) or **VS Code + PlatformIO IDE**
|
|
* Python 3.8+
|
|
* USB-C cable for flashing the ESP32-C3
|
|
* Xteink X4
|
|
|
|
### Checking out the code
|
|
|
|
CrossPoint uses PlatformIO for building and flashing the firmware. To get started, clone the repository:
|
|
|
|
```
|
|
git clone --recursive https://github.com/daveallie/crosspoint-reader
|
|
|
|
# Or, if you've already cloned without --recursive:
|
|
git submodule update --init --recursive
|
|
```
|
|
|
|
### Flashing your device
|
|
|
|
#### Web (latest firmware)
|
|
|
|
1. Connect your Xteink X4 to your computer via USB-C
|
|
2. Go to https://xteink.dve.al/ and click "Flash CrossPoint firmware"
|
|
|
|
To revert back to the official firmware, you can flash the latest official firmware from https://xteink.dve.al/, or swap
|
|
back to the other partition using the "Swap boot partition" button here https://xteink.dve.al/debug.
|
|
|
|
#### Web (specific firmware version)
|
|
|
|
1. Connect your Xteink X4 to your computer via USB-C
|
|
2. Download the `firmware.bin` file from the release of your choice via the [releases page](https://github.com/daveallie/crosspoint-reader/releases)
|
|
3. Go to https://xteink.dve.al/ and flash the firmware file using the "OTA fast flash controls" section
|
|
|
|
To revert back to the official firmware, you can flash the latest official firmware from https://xteink.dve.al/, or swap
|
|
back to the other partition using the "Swap boot partition" button here https://xteink.dve.al/debug.
|
|
|
|
#### Command line
|
|
|
|
Connect your Xteink X4 to your computer via USB-C and run the following command.
|
|
|
|
```sh
|
|
pio run --target upload
|
|
```
|
|
|
|
## Internals
|
|
|
|
CrossPoint Reader is pretty aggressive about caching data down to the SD card to minimise RAM usage. The ESP32-C3 only
|
|
has ~380KB of usable RAM, so we have to be careful. A lot of the decisions made in the design of the firmware were based
|
|
on this constraint.
|
|
|
|
### EPUB caching
|
|
|
|
The first time chapters of an EPUB are loaded, they are cached to the SD card. Subsequent loads are served from the
|
|
cache. This cache directory exists at `.crosspoint` on the SD card. The structure is as follows:
|
|
|
|
|
|
```
|
|
.crosspoint/
|
|
├── epub_12471232/ # Each EPUB is cached to a subdirectory named `epub_<hash>`
|
|
│ ├── progress.bin # Stores reading progress (chapter, page, etc.)
|
|
│ ├── 0/ # Each chapter is stored in a subdirectory named by its index (based on the spine order)
|
|
│ │ ├── section.bin # Section metadata (page count)
|
|
│ │ ├── page_0.bin # Each page is stored in a separate file, it
|
|
│ │ ├── page_1.bin # contains the position (x, y) and text for each word
|
|
│ │ └── ...
|
|
│ ├── 1/
|
|
│ │ ├── section.bin
|
|
│ │ ├── page_0.bin
|
|
│ │ ├── page_1.bin
|
|
│ │ └── ...
|
|
│ └── ...
|
|
│
|
|
└── epub_189013891/
|
|
```
|
|
|
|
Deleting the `.crosspoint` directory will clear the cache.
|
|
|
|
Due the way it's currently implemented, the cache is not automatically cleared when the EPUB is deleted and moving an
|
|
EPUB file will reset the reading progress.
|
|
|
|
## Contributing
|
|
|
|
Contributions are very welcome!
|
|
|
|
### To submit a contribution:
|
|
|
|
1. Fork the repo
|
|
2. Create a branch (`feature/dithering-improvement`)
|
|
3. Make changes
|
|
4. Submit a PR
|
|
|
|
---
|
|
|
|
CrossPoint Reader is **not affiliated with Xteink or any manufacturer of the X4 hardware**.
|
|
|
|
Huge shoutout to [**diy-esp32-epub-reader** by atomic14](https://github.com/atomic14/diy-esp32-epub-reader), which was a project I took a lot of inspiration from as I
|
|
was making CrossPoint.
|